98 integ's own
sit low
Parking light brakes wont work.Brake lights and headlights work just fine.Checked all fuses but still cant figure it out??anyone please..
98 acura, REALLY NEED HELP
- Thread starter 98 integ's own
- Start date
JayVee
2Dr Banger
Headlights work check .
Brake light when applying brakes work check .
Parking light brake lights ?
You mean reverse lights don't work or the actual P for park on your automatic shifter doesn't work ?
Sent from my Integra.
94RS
No fucks given.
I think he means the running light in the taillight doesn't work. :what: In that case, check the bulbs. Since they're dual filament bulbs, one of the filaments could have burnt out causing the brake portion to work and the running side to die.
It just happened to me last week on the passenger side. Brake light didn't work, running light did. Took the bulb out, half of it was black.
It just happened to me last week on the passenger side. Brake light didn't work, running light did. Took the bulb out, half of it was black.
MyLittleTeg
Honda Enthusiast
X2
Same happened to me about q month ago and it took me 3 hours to figure it out. When I finally checked the bulb itself I felt so dumb
98 integ's own
sit low
yeah man the corner front lights wont work nor my side markers which results in my running lights/stand by lights wont work.my bulbs on the brake lights work just fine.its weird.ive tried everything.can you help me out"???
98 integ's own
sit low
Yes i checked all the fuses and put in new ones plus bulbs.idk whats going on.i dont wnt to have to take it to a specialist,and pay for something that might have been a minor fix
DonJulio
Reppin' tha NW
Are your bulb sockets loose Or corroded?
Take some alcohol based cleaner to it and use a wire brush.
Before bulbs should be installed lightly use bulb grease to prevent future corrosion.
Take a pair of pliers to the metal socket and give both ends a slight squeeze to tighten the socket back up for better connections.
If its not a fuse, bulb, or connection issue its a bad ground.
Check that wires are not frayed or torn.
Always replace fuses with the correct amps or wire fires can occur.
Take some alcohol based cleaner to it and use a wire brush.
Before bulbs should be installed lightly use bulb grease to prevent future corrosion.
Take a pair of pliers to the metal socket and give both ends a slight squeeze to tighten the socket back up for better connections.
If its not a fuse, bulb, or connection issue its a bad ground.
Check that wires are not frayed or torn.
Always replace fuses with the correct amps or wire fires can occur.
98 integ's own
sit low
i think that's what happen I tried to replace the fuse with a different one.a 20 fuse I think it was..but even before that I would put in a 10 fuse and it would either automatically pop it or it would work for a bit.after I put that 20 fuse in it just stopped working completely
98 integ's own
sit low
no.this has been an issue with the car for awhile now.i got let off with a warning by a police officer because of this..could have been worse
dc4_illinois
Local Troll
Just a tip: I wouldn't recommend replacing any fuse with a LARGER rated fuse. Ever.
98 integ's own
sit low
Where exactly would the ground be tho man?