Hondaintegra99
Tire and Wheel Specialist
Hey Guys,
Now before i get started i am aware that all of the following are at one harness;
Tail lights
Dash lights
Dimmer (technically)
license plate light
ect.
The story:
Basically iv had my teggy for aboutt mmmmmmm 2-3 months now. I'v already had to do alot of tuning up. untill, i ran into this. I believe the amateur wiring of the previous owner on my radio has been causing my lines to short out every once in a while. So basically here n there i would short out and it blew out a fuse; My instrument lights, its a 7.5amp so i replaced it for the time being with a 10 amp fuse (SORRY) and that blew, then since it was dark at the time, i HAD to replace it with a 15amp. And that fuse didnt blow and NONE of the things on that harness was working at all. So, in a panic of that i fried my wires, i replaced all the bulbs and the fuses. STILL not working. I checked my wires. they didn't fry. and besides, its not enough amperage to fry a wire.
So i came on here to ask you guys, Is there a Resistor of some sort under the hood thats not clearly labeled for the harness? is the harness fried? and if the answer is clear, what should i replace?
Thank you for the time of reading this, honestly, its means a whollllleeee lot.
Now before i get started i am aware that all of the following are at one harness;
Tail lights
Dash lights
Dimmer (technically)
license plate light
ect.
The story:
Basically iv had my teggy for aboutt mmmmmmm 2-3 months now. I'v already had to do alot of tuning up. untill, i ran into this. I believe the amateur wiring of the previous owner on my radio has been causing my lines to short out every once in a while. So basically here n there i would short out and it blew out a fuse; My instrument lights, its a 7.5amp so i replaced it for the time being with a 10 amp fuse (SORRY) and that blew, then since it was dark at the time, i HAD to replace it with a 15amp. And that fuse didnt blow and NONE of the things on that harness was working at all. So, in a panic of that i fried my wires, i replaced all the bulbs and the fuses. STILL not working. I checked my wires. they didn't fry. and besides, its not enough amperage to fry a wire.
So i came on here to ask you guys, Is there a Resistor of some sort under the hood thats not clearly labeled for the harness? is the harness fried? and if the answer is clear, what should i replace?
Thank you for the time of reading this, honestly, its means a whollllleeee lot.
Last edited: