atomic_peach
New Member
I bought a Python 991 system and I have it all hooked up (minus the tach, brake, and defrost; I plan to do those soon) to my 95 db7RS. Anyway, the alarm works perfectly except that it will not lock my doors. If I arm the alarm, it is alarmed, but the doors do not unlock. If I disarm the alarm, the doors will not unlock. If the alarm has power, the passenger side unlock button does not work, all others do. If I de-power the alarm, the switch works fine. Same thing with using the key on the pass. door.
I have the alarm wires tapped into the wiring that the pass. switch uses at the gray connector above the driver's kick panel. Do I need to use diodes? Is the alarm interfering with the circuitry? Is the alarm broken?
I bought the alarm from amazon, so I can't return it. DEI will not help either. Hopefully you guys can?
Also, I noticed my trunk does not have a trunk trigger wire. Does the RS not have one? And can I find the defrost wire near the bottom of the console; if so, where?
Thanks!
I have the alarm wires tapped into the wiring that the pass. switch uses at the gray connector above the driver's kick panel. Do I need to use diodes? Is the alarm interfering with the circuitry? Is the alarm broken?
I bought the alarm from amazon, so I can't return it. DEI will not help either. Hopefully you guys can?
Also, I noticed my trunk does not have a trunk trigger wire. Does the RS not have one? And can I find the defrost wire near the bottom of the console; if so, where?
Thanks!