Compression test

osiris19

Active Member
If you have no smoke, and your cars getting 180 dry.

I'm pretty sure your where you want to be.

You also stated you have a b20, assuming its a USDM b20 with 8.8:1 CPR

It reassures me your oil rings are holding up.

The 9.2:1 CPR in the USDM b18b/a is suppose to get 200 psi dry is it not?
No. 180 like I stated before.

Sent from my Nexus 7 using Tapatalk
 

osiris19

Active Member
Do a leakage test. It requires putting compressed air into the cylinders. This will tell you if there are leaks.

Sent from my Samsung Galaxy S3
 

zack11122

New Member
Do a leakage test. It requires putting compressed air into the cylinders. This will tell you if there are leaks.

Sent from my Samsung Galaxy S3
Thanks. I will have to do this soon and let you know.
 


dopematic

New Member
Minimum compression is 130.
For compression test, you're really only looking for consistency between the cylinders with the max variance of 35psi.
 

DCiFound

SEAHAWKS!!
I heard u want to go by the third result on a 3 consecutive starts. Resetting to zero each time. Try that if u haven't done it yet. Other than that, 180 is stock
 

zack11122

New Member
Eh I guess I'm not really worried. I'll do my oil pan this oil change and see what happens.

Sent from my SPH-L720T using Tapatalk
 
Top