Our Website Family: TunerSports.com ClubCivic.com ClubIntegra.com
Attention Acura Integra Visitor:  Remove this block by logging in above or r

Welcome to ClubIntegra.com.

A forum dedicated to the Acura Integra, including all generations. In order to post on this forum you will have to register.

Registration is free and will entitle you to other site features including access to post your Acura Integra in the member's garage, join in raffles for performance parts, etc.

To start viewing messages by generation, select the Acura Integra forum that you want to visit from the list below. Or view all Acura Integra forums.

Go Back   ClubIntegra.com - Acura Integra Forum > Integra Generations Tech > 2nd Generation Acura Integra (1990-1993)

2nd Generation Acura Integra (1990-1993) 1990, 1991, 1992, 1993 Acura Integra

Please SEARCH before posting a new thread. ->
Ready to Post a New Thread/Question? ->



90 integra ABS Pump

2nd Generation Acura Integra (1990-1993)



Reply
 
Thread Tools Rate Thread Display Modes
Old 01-08-2017, 12:43 PM   #1
z1gary
Registered User
 
Join Date: Jun 2012
Posts: 12
 
iTrader: (0)

Default 90 integra ABS Pump

DA 9 ABS Pump
My brakes work but are squishy – feels like air in lines but after repeated bleeding attempts it seems the cylinders in the ABS pump are leaking. I don’t want a used bcz it will ALSO be 30 yr old like my car and I want my brakes to WORK!
Problem is: Does anyone know a reliable source for a rebuilt ABS pump? I know they are not cheap
thx
z1gary is offline   Reply With Quote
Old 03-13-2017, 10:47 PM   #2
g6qwerty
Registered User
 
Join Date: Dec 2011
Location: Denver, Co
Posts: 103
 

iTrader: (0)

Default

The car has the abs system in 3 parts, Abs Pump, Pressure reservoir and Modulator, Had one of mine leaking on my car Finlay realized that was what was causing me to have to refill the brake master cylinder.

Looked at the cost for new ones, and didn't want to spend $300+ on new parts, So decided to try to do it my self.
Pulled a whole assembly from a junkyard and pulled the modulator apart and cleaned it with water. It was quite dirty inside, and dry it with compressed air and put it back together with some brake fluid.
Then attempted to do the abs bleeding from the factory manual and drove it and engaged the abs to bleed the valves then bleed the breaks again. But the pressure reservoir is still bad or pressure sensor so the pump will almost constantly run.
So currently runing the car with the abs pump disconnected.

And then Recently I had to replace the rear brake pads and that improved on the long squishy brake pedal feel.

Though going though all that maybe too much for some people and just doing an abs delete may just be simpler. I have also heard that replacing the brake master cylinder can help remove / reduce the squishy brake pedal feel.

Photos of the Dissembled modulator are of the old one in my car.





Last edited by g6qwerty; 03-13-2017 at 10:55 PM.
g6qwerty is offline   Reply With Quote

Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
90 integra fuel pump filter problem negru213 2nd Generation Acura Integra (1990-1993) 9 07-19-2013 01:23 PM
My 90 Integra has ABS? how do I tell Andrew93 2nd Generation Acura Integra (1990-1993) 29 03-13-2010 12:34 PM
Fuel Pump Replacement in a 90 Integra? fox351 2nd Generation Acura Integra (1990-1993) 1 08-30-2009 05:23 PM
ABS pump install, Help!!!!! teggy604 3rd Generation Acura Integra (1994-2001) 5 08-11-2009 02:20 AM

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 03:08 AM.


Store News:

Latest Topics:


Store Specials:








Find this site helpful? Donations are appreciated.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
vB.Sponsors
Forum SEO by Zoints