GreenTeggy
My name is Ben
I found a GSR head on craigslist for $400 still running on the car guy says so if all checks out im thinking about picking that up what does everyone say? Its a hard choice as some know i have a b18b1!
So ive been thinking
- Thread starter GreenTeggy
- Start date
Samurai_Blue
Yolo Whippin'
i would build the ls
khurley424
New Member
i agree, if you go for it just make sure its done right. itd be a shame for that engine to go awry...
GreenTeggy
My name is Ben
This might be what im doing not sure yet.. cause im really close to being able to boost so we'll see i guess just wanting opinions!i would build the ls
Samurai_Blue
Yolo Whippin'
you know me,.NA or go homeThis might be what im doing not sure yet.. cause im really close to being able to boost so we'll see i guess just wanting opinions!
DAteg
New Member
if you go boost then don't. like samurai said, just build your ls thenThis might be what im doing not sure yet.. cause im really close to being able to boost so we'll see i guess just wanting opinions!
GreenTeggy
My name is Ben
That sounds good maybe i will...
do you have to have a higher compression for bigger cams? not too much bigger just slightly
do you have to have a higher compression for bigger cams? not too much bigger just slightly
DAteg
New Member
http://honda-tech.com/showthread.php?t=1910691&highlight=higher+compression+ratio+bigger+cams
there's a lot of info in that
there's a lot of info in that
Last edited:
red98teg
Keep on Truckin
if your running something like crower404's im pretty sure all you might need to do it run a higher octane. other than that im pretty sure you wouldnt need to worry about increasing your compression unless you wanted toThat sounds good maybe i will...
do you have to have a higher compression for bigger cams? not too much bigger just slightly