Bmxodysseymike
Member
Alright guys I got a mess here, bought a 92 teg im working on and when I bough it the rad fans were rigged to a switch I don't like that so I wanna attempt to get it working properly in the process of a wire tuck and figured now is probably the best time! So what I got is about 6 wires on the passanger side and like 3 or 4 on the driver side which all of go nowhere I have the helms book but not very good at reading diagrams can anyone help me out here with pics or a way to get these things working by themselves as far as i can tell there's no relay and idk what wires went to it
Those wires are passanger side:
Yellow/green
Yellow/black
Yellow/white
Heavier gauge white with red stripes
Red/black with silver stripes
Green/black with red stripes
Drivers side
Red/black with silver stripes
Blue/red with silver stripes
White with silver stripes
Green/white with silver stripes
Those wires are passanger side:
Yellow/green
Yellow/black
Yellow/white
Heavier gauge white with red stripes
Red/black with silver stripes
Green/black with red stripes
Drivers side
Red/black with silver stripes
Blue/red with silver stripes
White with silver stripes
Green/white with silver stripes