CV Axle Install

Cougar76

New Member
Ok guys we have been working on the passenger side front axle for 2days and we can't get the new one to lock in. Any suggestions would be great.HELP
 

Samurai_Blue

Yolo Whippin'
inspect the c clip on the passenger side, you may not be lining it up correctly too. Also look at the splines in the differential. once its lined up it doesnt take more than a slight push to get it to go into place.
 

LightSkinbyYosi

New Member
Okay so I just tried taking my axle out but it's not as easy as the write up. I don't have enough room to put a pry bar and it isn't wiggling out when I jam a flat head into it

Sent from my SAMSUNG-SM-N900A using Tapatalk
 


Sammich

Active Member
i just wanna say i said fuck the lower ball joint and i get mine out by taking apart the UCA. works better for me
 

Samurai_Blue

Yolo Whippin'
I do it that way since i have the extended ball joints. But either way a few taps of a hammer will free the ball joint, the bottom one i use a pry bar and a hammer.
 


Top