obo1 and obo2 conversion

So I have a 90 Integra with factory rebuilt motor. I was wondering if there was any way possible to convert the factory obo0 system to either obo1 or obo2 without swapping out the entire motor

Why do you want to convert it if you have the original engine?

Because I want to put different cams and tune the ecu

oh, you just need a jumper harness for the ecu to run an obd1 ecu.

http://www.tunersports.com/boomslang-obd0-to-obd1-harness_mp1586.html

If you want a more reputable brand i think Rywire makes them. Probably more expensive. I personally use Yonaka i think and its fine. they dont make a obd0 to obd1 though.

Forget OBD2. The only OBD2 tuning platforms for our cars are piggy backs. You want OBD1 then use Hondata, Neptune or Crome to a lesser extent.

Muckman said:

Forget OBD2. The only OBD2 tuning platforms for our cars are piggy backs. You want OBD1 then use Hondata, Neptune or Crome to a lesser extent.

Click to expand...

exactly.


OP you will still need the jumper harness i showed you.