1991 cruise control

Have a 1991 integra and have the parts to start puttting in factory cruise. Are there wires already in place to install factory cruise? Don't think I'm seeing any.
any help tips, thanks

Doubtful. It wasn't an option that a dealer would do, so I doubt that there is a harness there for it. You'll likely be cutting and splicing wires after staring at wiring diagrams for hours.

My 91 LS had cruise control, but I yanked out the switches when I changed my wheel. if you remove the wheel, there's a spindle with a wiring harness which should have 3 wires connected to it ( at least that's how it is on my car). The horn wire I think is green and cruise control are the 2 blue wires. Cruise control on DA's isn't electronic though so you might want to make sure you can mount the cruise control solenoid onto your throttle body, otherwise you'll have to swap out the throttle body with one from an LS integra or one that has cruise control. Hope this helps you.


Sent from my iPad using Tapatalk HD

My car has cruse control, just fixed it because somebody changed my dash wiring harness which I just changed back so now it works.
You need that dash board wiring harness, the main wiring harness and the engine wiring harness (drivers side is important) Also you will need to remove the dash board for easy access to the wiring harness and drivers side kick panel and perhaps some more where the wiring harness goes though the fire wall on the drivers side, and from the main computer. Also you will need to replace or upgrade your Instrument cluster too.

You should be able to do it by your self. May take you a day or two with all parts ready to go in.

Also may want to check out the factory Service manual http://www.spoonertuner.com/manuals (its under all models)

http://youtu.be/Vxpliafy1x0 what it should look like