Idle screw coming out

yoshi408

Member
For some reason my idle screw has been unscrewing its self after driving the car and makes my idle way up high any way to fix the screw to make it so it doesn't unscrew its self?
 

Muckman

Not a M0derator
You can try some teflon tape or RTV on the threads to make it harder to turn but not so permanent.
 

Nick_C78

New Member
RTV sealer is a good choice or Blue loctite should be fine, just do not use the red shit. You will never get it off. If it were my car I would try the blue loctite. Both options have to cure a little before you take it for a spin though. Keep that in mind.
 


96LSteg

Jemel
You should cover it with a silicone calking of some sort once its adjusted as a secondary to keep it from backing out
 
Top