Rotor removal 4X114 help!

vincebeknown

New Member
I need help removing the ITR 4X114 rotors. I've already removed the calipers and the bracket that holds the brakes. I've also removed the screws to the rotors too. When I try to pull the rotors off, it feels like it is stuck to the Hub, but it's almost off. Do I have to keep pounding the hub (aroud where the 36mm bolt is) to narrow it so it comes off?
 

BigMac88

Fat guy in a little 'teg
If you have a rubber mallet you can tap around the hub, that should loosen it up. Avoid hitting the rotor and studs :thumbs up
 

j13

Keep It Clean
Yeah rubber mallet should get it off. And some DW-40 to losen it some.
 


jonyi27

New Member
yea put WD-40 around the back were in connects and hit it wit the rubber hammer avoid the studs ....
 

jmou09

New Member
just some love taps with a mallet works. On my gsr which the rotors have never been replaced till about 2 months ago they were like glued on. some good ol love taps and there free
 
Top