B16 head B20 block..wut distributor do i need???

B16 tranny B20 block n B16 head DOHC v-tec....i need to know wut is the right distributor 4 that engine swap....can any1 help me out??

You need a dizzy to match the head.

Are you OBD1 or ODB0?

agree with guy with the first answer u need a dizzy to match the head then if the dizzy dont match the ecu reseach for a jumper harness for example a jumper harness from ob0 to obd1

thanx

mirrorimg said:

You need a dizzy to match the head.

Click to expand...

wuts a dizzy

2ndgen_teg4life said:

agree with guy with the first answer u need a dizzy to match the head then if the dizzy dont match the ecu reseach for a jumper harness for example a jumper harness from ob0 to obd1

Click to expand...

thanx foo but wuts a dizzy?? u got a 4 door?

ok depending on what obd ecu you will use thats what dizzy/disstributore you will need.
example: if you have a 92-93 integra then your obd1 and already have the obd1 harness so all you need is 3 things.
1. obd1 vtec ecu
2. obd1 vtec disstributore unless you or someone can cut and splice any obd0 or obd2 disstributore to your obd1 harness.
3. wire up vtec and knock sensore to ecu.

same thing if your obd0 90-91 integra, you can run your vtec head as a obd0 jdm b16 wich is a plug and play for your harness and find a pw0 obd0 vtec ecu to run with a chip. the obd0 b16 vtec dizzy has a 220# on it, not sure what number is on the obd1

If you bothered to just google it... you would have had your answer, foo.

dizzy = distributor
sort of like
foo = fool