Kitkat18
New Member
Ok, so I figured out how use the paperclip to get the CEL code thanks to the awesome folks on this site. I have a code 22 vtec pressure valve. I took it into the mechanic and he said everything looked ok and since the light only comes on after 45 minutes of driving not to worry about it for now.
I also have an ABS code that comes on after about 45 minutes of driving. I would like to read this code, but the CEL always flashes first and I cannot get the ABS code to flash. Any ideas out there?
The only symptoms I have with the car right now is a low idle 500rpms and a stutter/shudder going into first from a full stop. And of course the ABS buzz every couple minutes.
Kat
I also have an ABS code that comes on after about 45 minutes of driving. I would like to read this code, but the CEL always flashes first and I cannot get the ABS code to flash. Any ideas out there?
The only symptoms I have with the car right now is a low idle 500rpms and a stutter/shudder going into first from a full stop. And of course the ABS buzz every couple minutes.
Kat