My 94 Sedan Build-Up - Lots of Pics = ) [ Updated Constantly... So Stay TUNED!!! ]

[DailyDB8]

iono, cause it was specifically designed to be used with the oem strut?

[Aussie]

Originally Posted by DailyDrivenDB8

iono, cause it was specifically designed to be used with the oem strut?

Oh, I dunno, just wondered, it just seemed like they were doing the same thing, but thats cool if that's what it was designed to do.

[DailyDB8]

i might remove the oem strut to see if it does any difference with or without it. but so far the front end feels a lot stiffer and less understeer.

[404 Da Teg]

i wonder what coilover on your teg now??

[DailyDB8]

i have some shocks and springs actually. nothing fancy. some tokico blues and h&r's.

[Aussie]

Originally Posted by DailyDrivenDB8

i might remove the oem strut to see if it does any difference with or without it. but so far the front end feels a lot stiffer and less understeer.

Looks good man, keep it up.

[dc2GS-R]

Originally Posted by DailyDrivenDB8

i might remove the oem strut to see if it does any difference with or without it. but so far the front end feels a lot stiffer and less understeer.

I would just leave it. It isn't hurting anything and only tightens up the front of the chassis more. Removing it would be purely cosmetic IMO......but it doesn't look bad anyway

[K. Legaspi]

If you do decide to take the GSR Front Strut Bar off, I might buy them because the ebay strut bar that I have are really nasty looking. So I'm going with a Cusco Front Strut bar and an OEM GSR bar combo. lol IF it works.

[JDMxDB8]

Originally Posted by Kev_98IntegraLS

If you do decide to take the GSR Front Strut Bar off, I might buy them because the ebay strut bar that I have are really nasty looking. So I'm going with a Cusco Front Strut bar and an OEM GSR bar combo. lol IF it works.

The Cusco strut bars bolt on the same place as the OEM.

I'm getting the Password: JDM 3-point strut bar.

[404 Da Teg]

i m going to see one lady name ALISA.. she got jdm front end to sell for 1350.. tell me what i need to check before i buy it?? what's missing?? she told me that its full complete JDM FRONT END it gonna be my first time to buy jdm front end.. '


wanna to see that one then go that link

http://www.gategs.com/modules.php?na...ewtopic&t=2043

[JimmyRos.]

Originally Posted by 404 Da Teg

i m going to see one lady name ALISA.. she got jdm front end to sell for 1350.. tell me what i need to check before i buy it?? what's missing?? she told me that its full complete JDM FRONT END it gonna be my first time to buy jdm front end.. '


wanna to see that one then go that link

http://www.gategs.com/modules.php?na...ewtopic&t=2043

2x JDM fenders w/ sidemarkers
2x JDM fenderlinings (USDM fenderlinings can also be used)
1x JDM hood
1x JDM front bumper
1x JDM ITR lip
1x JDM Grille
2x JDM headlights w/wo HIDs
1x JDM radiator support
1x Reinforcement Bar
1x Bumper Support
1x JDM hood latch or DA hood latch w/ cable

i believe that's it.

[DailyDB8]

^^^ basically what he said.

Originally Posted by 404 Da Teg

i m going to see one lady name ALISA.. she got jdm front end to sell for 1350.. tell me what i need to check before i buy it?? what's missing?? she told me that its full complete JDM FRONT END it gonna be my first time to buy jdm front end.. '


wanna to see that one then go that link

http://www.gategs.com/modules.php?na...ewtopic&t=2043

you'd want to check the hood and headlights to make sure it comes with the rubber gromets. check the head lights to make sure the chrome housing isn't peeling or cracking, and make sure the casing of the headlight isn't cracked. also you'd want the clips on the hadlights where the grill connects to them. the brackets behind the grill are intact... other that than you should be good. everything else will most likely require body work.

btw i cant see the link cause i'm not registered

[K. Legaspi]

Originally Posted by JDMxDB8

The Cusco strut bars bolt on the same place as the OEM.

I'm getting the Password: JDM 3-point strut bar.

not these



or atleast i dont think so..

/thread jack

[404 Da Teg]

Originally Posted by DailyDrivenDB8

^^^ basically what he said.





you'd want to check the hood and headlights to make sure it comes with the rubber gromets. check the head lights to make sure the chrome housing isn't peeling or cracking, and make sure the casing of the headlight isn't cracked. also you'd want the clips on the hadlights where the grill connects to them. the brackets behind the grill are intact... other that than you should be good. everything else will most likely require body work.

btw i cant see the link cause i'm not registered

i got it.. thanks!!










i know two things are missing.. i will goin there n check what's missing..

[DailyDB8]

you might wanna ask the seller if these parts came off a type R or SIR-G. they are identical... but prices differ from each other. Si-R is cheaper... but people says its "type r" to get more money out of it. from what i can see the hood is SI-R... all type r hoods come with the red H badge. fenders and lip look to be OEM championship white color... so those are probably real ITR and the rest SIR-G... its my guess.