1. Get engine to operating temp ( wait for fans to come on)
2. Turn ignition off
3. Disconnect the connector from the sensor
4. Measure resistance between 2 terminals on ECT Sensor -
Should be between 200 - 400 Ohms, if not replace the sensor. Also make sure they have a good connection. Its also possible to have missed them while swapping.
Real Wheels > Stock Wheels > Steelies > Rotas > Wagon Wheels
Help support the site.
WTB: DA6 OEM "Superwing"
Originally Posted by JoshGSR
One of my Rotas just cracked