Skunk2 Intake Manifolds

[Jay Jay]

Skunk2 Pro-Series Intake Manifold




Skunk2 Racing’s Pro-Series Intake Manifold improves airflow thus increasing horsepower by as much as 8% over stock manifolds on stock engines and even more on modified or forced-induction engines. Skunk2 manifolds significantly increase horsepower between 3000-8800 rpm; the broadest powerband increase in the industry. Our new Pro-Series design features a 22% increase in power over our previous design. Engineered with a larger plenum and tapered runners, Skunk2 manifolds increase and accelerate airflow, and are designed to increase the effects of wave scavenging at the engine’s optimum operating RPM range providing a broad overall increase in usable power. Each runner entry is also modified to balance airflow between cylinders. Oversized throttle bodies can be used as a result of the modified IAC opening on the flange. Like OEM factory manifolds, Skunk2 manifolds are shell molded and CNC machined, to achieve superior strength, high-quality finish, and a precise fit. Each manifold is vacuum tested to ensure quality and leakfree operation. The Skunk2 Pro-Series manifold utilizes all stock sensors and auxiliaries for a simple bolt-on installation that delivers maximum power.

Key Features:

•Ideal for NA and Forced Induction
•Increased Plenum and Runner Size
•Oversized Throttle Body Opening
•Made From High-Grade 356 Aluminum
•OEM Quality Shell Molded Casting
•Nitrous Mounting Bungs
•Skunk2 Acid-Etched Nameplate
•Broadest Usable Powerband
•Vacuum Tested To Ensure Quality
•Utilizes Stock Sensors

Skunk2 Pro-Series Intake Manifold
Starting at $275.99 Shipped

http://www.tunersports.com/products/...ifold_114.html

[Jay Jay]

bump

[Jay Jay]

bump

[TheNailGuy]

hey ive got a question. ive got a 1997 GSr completely stock. im looking to ither get the N1 or the WS 2 exhaust, but if i were to buy the skunk2 intake manifold. what else should i upgrade? or can i just get that and install it. sorrry im a big car newb, any info is appreciated!

[Samurai_Blue]

Originally Posted by TheNailGuy

hey ive got a question. ive got a 1997 GSr completely stock. im looking to ither get the N1 or the WS 2 exhaust, but if i were to buy the skunk2 intake manifold. what else should i upgrade? or can i just get that and install it. sorrry im a big car newb, any info is appreciated!

intake manifold will make your car run lean you need to upograde cams

[TheNailGuy]

do you think ITR Cams would work with this? i got a buddy thats selling them for pretty cheap

[Jay Jay]

Yes they would.

Bump for these. Now available in black and red on certain applications.

[Jay Jay]

bump

[Jay Jay]

bump

[navysailor956]

Do you know where I can find a how to install a SK2 intake mani for a 92 GSR?

[Jay Jay]

Should be similar to when I installed it on my 01 GSR

http://www.clubcivic.com/board/showthread.php?t=108068

[MxDon35]

So putting an intake manifold on a stock 01 GSR would make the car run lean? I'd like to buy one but if its going to lean me out, i don't want to get into motor work to balance things. Jay Jay, was your car stock when you installed your intake manifold?

[Jay Jay]

Mine is turbo and was chipped to remove the IABs of the stock manifold.

[Jay Jay]

Skunk2 Products
5% Off Skunk2 Products (excluding package deals)
coupon code: 5%OffSkunk2

[lokibear]

i need help! i have 01 gsr and have the skunk2 im but im completely missing the purge solenoid and hoses for it. i noticed this when i looked at my canister and saw that there was no hose on the purge port. if i get a hold of the purge solenoid where do i route the hoses. i know skunk two said i need a T at the pcv or something. i dont understand it cuz im a very visual person. so any help would be amazing! thanks!