intalling motor mounts?
- Thread starter OT209
- Start date
Samurai_Blue
Yolo Whippin'
only one of them is underneath technically
Samurai_Blue
Yolo Whippin'
its easy enough to do actually
covert_Con
Senior Ricer
The mechanic will overcharge you to just get a haynes manual and dig in. It's really not that hard.
OT209
New Member
im sure its not i just have no idea what to do. i can get a motor mount for under $20 online, but I don't know which one I need or how to install it.The mechanic will overcharge you to just get a haynes manual and dig in. It's really not that hard.
covert_Con
Senior Ricer
The haynes manual will tell you everything. Get that and then proceed from there. I'm sure its not hard compared to the other stuff you've already done.
Samurai_Blue
Yolo Whippin'
that write up is wrong, i pulled the T bracket out. i proved it wrong
OT209
New Member
ahhh ok now i have a better idea of where they are. thanks that helped out.
OT209
New Member
ill have to look into that then. thanksThe haynes manual will tell you everything. Get that and then proceed from there. I'm sure its not hard compared to the other stuff you've already done.
OGstackadoIIa
TEAM LlGHTSPEED RACING
lmfao! That is true, but it's a better guide than the kid has at this point
Samurai_Blue
Yolo Whippin'
it doesnt really help unless hes doing what i did for yours. it only helps if hes missing the side mounts, the other ones are harder to do to replace.lmfao! That is true, but it's a better guide than the kid has at this point
OT209
New Member
true, i don't even know which one is the problem.it doesnt really help unless hes doing what i did for yours. it only helps if hes missing the side mounts, the other ones are harder to do to replace.