Search results

The body is in good shape but someone had a macco paintjob done on it. They didnt even sand the factory clear underneath. Just sprayed over it. No rust in the qtr pannels or under side skirt from what i can see Sent from my LGL52VL using Tapatalk

The auto got sold to my brother and my 5 speed swapped went to my buddy elijah. He was walking and i got a 3rd geb prelude so i let it go. Worst mistake ever. Heres final product on the 5 speed swapped now Sent from my LGL52VL using Tapatalk

So it has been a while since I have had an integra. Switched over to the civic hatch life for a little bit. Finally got the offer for another teg and couldnt pass it up. So heres all the info 1999 Integra Gs model 4 door Clean interior Auto (5 speed swap v2.0 coming soon) 177k miles It has a...

Finally back in the teggy game. 99 4 door gs with 94 front....and yes shes very ugly end Sent from my LGL52VL using Tapatalk

They slapped them in and tried to spin it over and scarred the hell out of number 1 main bearing. Just sold the block because its going to be a pain with all of the abuse it's had Sent from my XT1526 using Tapatalk

Okay sorry everyone. My info was mixed up. Took the girdle off and it's running standard size King bearings and the assembler used no lube. I'm going to pull the crank and check for scarring and measure it. While I'm at it I'm homing and putting in new rings Sent from my XT1526 using Tapatalk

So I just traded around and got a 91 b16 head and a b18c1 block out of a 4 door gsr. Apparently the old motor spun a bearing and they replaced all 4 with oversized bearings and now it won't spin over. Any ideas on what to do? Do I have to replace the crank and get OEM bearings or can I have my...

Yep. A b16 will work. Just make sure your head gasket is for the right kit. Some kits are for 1.8 and some are for the 2.0 Sent from my XT1526 using Tapatalk

Ran the numbers and he has a gsr booster hooked up to a RS master cylinder, the slides got regreased, and went and got a LS master cylinder so they are both abs Sent from my XT1526 using Tapatalk

So after basically tearing it all the way down the master cylinder (new) isn't pushing fluid out of the front port. It's only pushing air and misting brake fluid Sent from my XT1526 using Tapatalk

Slide pins have been checked and they aren't stuck. I checked the pedal and it has no play in it. i think when the mc was changed by the previous owner, that he did not adjust his pedal. Hoping that fixes it, not much more than can be replaced other than a porportioning valve, the hard lines...

So it's a abs delete and he put a LS master cylinder in it. Only the front left will stick and it's after a mile. Dosent matter if it use ebake only or brakes Sent from my XT1526 using Tapatalk

So I bought a 92 teggy and it had all 4 calibers locking up going down the road. Before I bought it, the calibers had all been replaced with remanned autozone, pads, Rotors, Hoses on the front master cylinder (LS) and a used 40/40 proportioning valve Idk if the brake booster is RS or LS...

Yeah I have two already that would work but I'd like ac. 100 degrees and Grey car with no tint=no Bueno. Already ran a flat black cat with no ac for a year Sent from my LGL22C using Tapatalk

Thanks I'll check it out. Found some but they were cast stainless and ran around 4 bills Sent from my LGL22C using Tapatalk

Sent from my LGL22C using Tapatalk

So I'm getting ready for turbo. Ar63 turbo, tial bov, hondata s200. Looking to keep ac and have a few questions. Does anyone know a good manifold that will keep ac. All I need is ac keep manifold, injectors, pump, and some piping. Already talking to a guy about a tune when I'm ready Sent from...

You can have cheap, fast, and reliable. If you want your motor to last you a while go for forged internals. Oem is meant for n/a 140 hp not 300 Sent from my LGL22C using Tapatalk

Subbing to find out as well. Mine stick out about a half inch. I know the moulding are attached to the window but Idk how to reset it in place Sent from my LGL22C using Tapatalk

Yeah 17s dont belong on a teggy lol Sent from my LGL22C using Tapatalk