1wingnut1 New Member Jun 5, 2010 #1 if i get a b18b vtec motor and the ecu out of a diffrent teg and put it in my da9 will the vtec work or not
if i get a b18b vtec motor and the ecu out of a diffrent teg and put it in my da9 will the vtec work or not
jznsn2u Active Member Jun 5, 2010 #2 1wingnut1 said: if i get a b18b vtec motor and the ecu out of a diffrent teg and put it in my da9 will the vtec work or not Click to expand... b18b's come from either ls/rs/gs/se models with No Vtec. b18c/c1/c5 come from either jdm gsr or type r/ usdm gsr/ usdm type r with vtec.
1wingnut1 said: if i get a b18b vtec motor and the ecu out of a diffrent teg and put it in my da9 will the vtec work or not Click to expand... b18b's come from either ls/rs/gs/se models with No Vtec. b18c/c1/c5 come from either jdm gsr or type r/ usdm gsr/ usdm type r with vtec.
1wingnut1 New Member Jun 5, 2010 #3 thank u but if i get a b18 that is vtec and the ecu out the same car will it work in my da9 will the ecu work in my car
thank u but if i get a b18 that is vtec and the ecu out the same car will it work in my da9 will the ecu work in my car
j13 Keep It Clean Jun 5, 2010 #5 If your da9 is manual than it should be a straight swap. Your wiring harness will need to be changed out though, so I would let a shop that does swaps do the install for you Last edited: Jun 5, 2010
If your da9 is manual than it should be a straight swap. Your wiring harness will need to be changed out though, so I would let a shop that does swaps do the install for you
