B18B swap help!

[DA9BOy$]

I just swapped a b18b1 into my 92 Ls and now when i went to connect the clutch cable to the tranny it dont reach and the lever that it connects to on the tranny wont move at all, my tranny is locked up and idk what to do to fix it....anybody know what i should do?

 

[ModelEfficiency]

I feel like opening up the transmission is the only way to determine what exactly you need to do to fix the problem. I've read that the release arm can seize in the transmission, maybe all you need to do is replace it.

 

[BrokenTalon27]

Did you keep the original transor did you leave the hydro trans on the b1 motor?
Also, it sounds like you ran the cable wrong.

 

[DA9BOy$]

lept the original tranny