cooldudeglass
New Member
Hello clubintegra I have a b18a1 motor that I pulled out of my 1990 4 door integra when the auto trans went out, I'm now putting the motor into my 1990 2 door 5 speed integra. I have swapped the flywheel to the auto motor and I bought a new xtd clutch kit which I have just installed it and when I mount the tranny back on the motor its seem like the throw out bearing is not touching the fins on the pressure plate when I move the lever outside the tranny up and down. Its like the clutch is not engaging because the lever moves up and down with my hand on it. I can hear the throw out bearing touch the fins but when the lever is all the way at the top position. Any help will be greatly appreciated