cooldudeglass
New Member
Hello club integra I have b18a1 from my auto1990 4door integra that I pulled an I am now the process of putting it in my 1990 2door 5 speed integra. I have put the flywheel onto the auto motor and now I have installed a new xtd clutch kit the I bought an it Mounted up just fine an also I installed the new throw out bearing that came with the kit but when I mount the tranny back to the motor an move the lever when the tranny cable connects up an down an its like the throw out bearing is just barely touch the fins on the pressure plate. I dont know what the problem is. The fins on the pressure plate are parallel like there supposed to be an the tranny mounted smooth the motor. Please help