flynn
New Member
Alright I have a 93 integra with a b18c1 swap b16a tranny exedy stage one clutch and 9.5lb flywheel. I already took all of it apart, inspected and put it back together. The car will not go into any gearr while running. If you lift it in the air it will shift into all gears smoothly. However on the ground with the cara weight it will not. This is a CABLE tranny. When you push the clutch in about a quarter inch from the floor you cab hear it start to grab the clutch but it just makes a grinding noise for a split second like its trying to grab the flywheel and then quits. I've adjusted the cable at the transmission to the Mac and it doesn't change it pulls the fork all the way to where its suppose to stop. Now would adjusting the nut on the pedal make any kind of difference? Does anybody have any further input? I'm open to any ideas. Thanks for your time guys.