CRV Build B20 Manual Trans on b18c5 Block?

[00GSRfullbuild]

Will a CRV, like a 97-99 i think, b20 trans go on a b18c5 block with no problem? We are working on a swap in a CRV and trying to figure out what motor/trans setup to go with that is capable of awd. So the only other option would b a k swap, getting a K series motor n mating it with a k24 CRV trans. So let me know if anyone has any insight, we dont want to "just try it" but if no one says why i guess we will try it.

Thanks

 

[Rich-PMS]

I'm going to take an educated guess....

If a b20 block can mount up to a gsr/ls/b16 trans. I think it's safe to say you can bolt the crv trans to the b18c block

 

[Samurai_Blue]

the manual b20 tranny i belive is a ls tranny

 

[00GSRfullbuild]

Ok sweet so it should totally work, from logic i guess. Suppose we will see where this takes us, thanks guys for the input.

 

[Samurai_Blue]

remember All b series trannies are interchangable with b series motors except the prelude one

 

[00GSRfullbuild]

See i always thought that but was never actually 100% sure of that. Thanks for your guys feedback

 

[Samurai_Blue]

thats a rule of thumb i think it matters if the motor came with a cable tranny and you want a hydro one on it i forget.