FR wheel bearing

keefkid

New Member
so i saw a couple other posts about wheel bearings but none of them really answered my questions. I just bought a front right wheel bearing and was planning to put it in but after some research i realized i cant do it without a press. but what needs to be pressed? is it the hub or bearing and can i fix my bearing with just a new bearing or do i need the whole assembly (hub, etc)
any help would be greatly appreciated
 

Nick_C78

New Member
No. You just need to fight with or pay a shop(recommended) to remove the inner race. It is a ring that stays stuck to the hub when you remove the hub from the bearing. Or you can take your entire hub and knuckle assembly to Napa, hand them the bearing you bought + $50 and let them do all the work for you.
 


You must log in or register to reply here.
Top