manual tranny

evansricky49

New Member
will cv axels from a 92 integra ls go into a 90 integra ls tranny and is there anything else i need to do to perforn the swap
 
Last edited:

djzachtyler

Looking for my next Teg..
90-93 axles are the same... just do not get remanufactured axles... especially if your car is lowered.. they are known for breaking.

new OEM axles are only like 60 bucks or less a peice. I'd recommend that and call it a day.
 


evansricky49

New Member
I already got drive and passengerside axles just need tranny and clutch ass


Sent from my DROID3 using Xparent Blue Tapatalk 2
 

smellyda

New Member
If you're going from an LS 2 a YS 1 transmission the splines on the output shaft are the same but the diameter is not it is bigger I did a swap on my 90rs sedan and I had to use a 97 Honda Prelude 2.2 VTech clutch but the axles are the same
 

evansricky49

New Member
i was just makin sure that all would work except i new the clutch (ASSEMBLY) wouldnt work even though part stores says it will
 
Top