Need head swap help

[joeliebobelie]

I currently have a b18a and am being offered a b18b1 built head with cams, valves, retainers, spings, adjustable cam gears, and cam seals, what would I need to make this work on my 1993 integra?

 

[sn3akypr]

as far as i know nothing should bolt right up wiith your b18a1 block. torque down to specs and voilà

 

[LoweredDC4]

was the head milled at all? do you have enough valve to piston clearance with the different valves/cams? It should bolt right and also use ARP head studs and get tune.

 

[386]

was the head milled at all? do you have enough valve to piston clearance with the different valves/cams? It should bolt right and also use ARP head studs and get tune.

This.
Be sure to use new studs, and tuned

 

[dlo253]

That. But to get the most from the built head, it would be worth the extra bucks to get some higher compression pistons while the motor is apart.. It is not needed but I would do it,