pw0 for obd1?

[boostedninja]

ok i have a pw0 ecu, can that run my obd1 b16 (ect is on the side of the head not the back)... i think there is a obd0 dizzy on it. cause it plugged right up and the wires match. i have every thing ran except 02 sensors and ect sensor. do i need those to crank or start up. i tried to crank it and nothing.... it just beeps constantly.. can any one help me.. my b16 block number starts with 9/2 is that 1992 . and i have a ys1 tranny is that ls or gsr. its supposed to be all jdm stuff.

 

[BrokenTalon27]

A YS1 trans came on the USDM 92-93 GSR, I'm not sure what JDM motors it came on, if it came with any. I would think that you need to get the proper jumper harness and OBD1 ECU to make things work properly.

 

[g2teg]

A YS1 trans came on the USDM 92-93 GSR, I'm not sure what JDM motors it came on, if it came with any. I would think that you need to get the proper jumper harness and OBD1 ECU to make things work properly.

find a p28 and get a obd0 to obd1 jumper harness should do the trick also check out www.g2ic.com and join if you havent already great site for info and everything else second gen teg related