Rough idle .. Unplug tps and idle normal.

[sirricealot]

Is the tps bad? Pm me your reply, on mobile phone. Or help me please, I'm new to Honda. 93 ls 1.8

 

[emd513]

might be it. mine does that to but my iac is also bad

 

[Rich-PMS]

Check your ecu codes

 

[sirricealot]

no codes until i unplug it...

 

[ixcocoyxi]

i believe you need an ohm meter to adjust the tps... dont you??

 

[sirricealot]

i was just gonna replace it...
its like 25$

 

[sirricealot]

just got my tps in mail and noticed in book it says replace TB all together.
wtf... can i rig the new tps onto the tb?
the tps looks like it has holes for screws...;/
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250669715959&ssPageName=STRK:MEWAX:IT#ht_1688wt_958

 

[emd513]

you might be able to if you tap it with a threader

 

[Mikeb353]

Did you check for voltage on you tps sensor, I would also go ahead and get some seafoam clean all the dirt and junk building up in the car, remove your IAC Valve clean it really well. Put everything back together and see how it goes. if you need more assistance here is my cell 860-751-9780 name is Mike

 

[sirricealot]

wheres my iac?
i already tried seafoam and it was shit, no smoke, barely burned off anything.
i didnt check voltage on tps yet but when i disconnect it runs great.
connect and runs shitty so bought new tps and come to find out the tps is riveted onto the tb.
which idk how to even begin to get off.
i can always put new screws in or something but how to get off?

 

[mrhnson]

If they are anything like mine was. Take a dremel and cut a notch on the top of the rivet. Then take a flat head screw driver and screw them out.

 

[NemesisCBR]

Glad you posted that cus its been 3 years and he still hasnt figured it out.

 

[nc crucial]

Lolz