Kanin789
New Member
I have a 1990 acura integra gs hatchback b18a1 with 292XXX miles in it.
I just recently put new head gasket, new intake & exhaust mani gasket, valve lapped, new valve stem seals, i took my cylinder head to machine shop to resurfaced, new coolant, new radiator cap, new plugs and wires. Now i'm getting 150 psi accross the board. It runs strong. But on the third day after hg has been replaced. i hear gurgle on my reservior, sounds dripping and i thought that was just normal since engine is hot. on the 4th day after drving it for half hour then i saw the coolant reservior is overflowing. On the 5th day i replaced the radiator cap coz i thought that was causing the overflow on my reservior. So i drove it arroung and pulled over to see if it still overflowing and it does'nt. I tried to start it again and huge white smoke coming out of my tailpipe but i don't see any milky on engine oil, neighter on coolant.
I just recently put new head gasket, new intake & exhaust mani gasket, valve lapped, new valve stem seals, i took my cylinder head to machine shop to resurfaced, new coolant, new radiator cap, new plugs and wires. Now i'm getting 150 psi accross the board. It runs strong. But on the third day after hg has been replaced. i hear gurgle on my reservior, sounds dripping and i thought that was just normal since engine is hot. on the 4th day after drving it for half hour then i saw the coolant reservior is overflowing. On the 5th day i replaced the radiator cap coz i thought that was causing the overflow on my reservior. So i drove it arroung and pulled over to see if it still overflowing and it does'nt. I tried to start it again and huge white smoke coming out of my tailpipe but i don't see any milky on engine oil, neighter on coolant.