window replacement help

95project_GS-R

New Member
i gotta replace the window n my gf's car. anyone know a link or how to replace the glass on the driver side of a 91 da coupe.
thanks
 

ixcocoyxi

RS owner
from what i know...

-remove door panel
-loosen regulator bolts (not all the way. just enough to remove by finger)
-roll window down till you see the bar that holds the windshield

its that bar on the top that goes across the whole thing. on top of the 'scissors'
-there should be a way to remove the bolts that go thru the bottom of the glass
-remove all broken glass
-replace glass
-replace bolts
-tighten window regulator
-replace door panel
-enjoy rolling up/down window
 


95project_GS-R

New Member
sick man thanx a lot. also you have a dc coupe, any info about how to do shocks and struts. im waiting on a new suspension and want to know if you can gimme some help with getting them in or tips.
 

ixcocoyxi

RS owner
95project_GS-R said:
sick man thanx a lot. also you have a dc coupe, any info about how to do shocks and struts. im waiting on a new suspension and want to know if you can gimme some help with getting them in or tips.
Click to expand...
-jack up car
-remove wheels

front
-loosen top shock bolts (x3 14mm)
-remove fork bolt on shock (14mm bolt/nut)
-remove LCA bolt (14mm? 17mm? bolt/nut)
-remove brake lines (x2 10mm bolts)
-let fork drop out from the shock
-remove top 3 shock bolts
-pull old suspension out
(reverse for install)

rear
-loosen top shock bolts (x2 14mm)
-remove LCA bolt (14mm? 17mm? bolt/nut)
-remove UCA from frame (x2 14mm) it will make it a lot easier!
-remove top shock bolts
-remove old suspension
*caution - rear LCA bolt may be rusted so be sure to have some EZgrip (PBblaster) people tend to snap this bolt.
*note - have a scissor jack (stock jack) to help push the UCA up from rotor/hub back up to the frame
(reverse for install)

if you have a blackberry, feel free to add me on BBM...
mypin - 24A258BE
 
You must log in or register to reply here.
Top