Home » Engine » Pistons

Wiseco Sport Compact Pistons

SPRING IS HERE! Save on most items with Coupon Savings Code: SpringSavings
Saves on almost everything, including sale items. Combo deals and certain manufacturers are excluded from this coupon code. Savings only valid on orders that enter the coupon code.

Back

Acura Integra Wiseco Sport Compact Pistons

Actual product my vary from image(s).

by Wiseco

Category: Pistons

Product Review:

Wiseco sport compact pistons are forged and machined in-house and receive a full compliment of power enhancing features. Light weight forgings, millimeter ring packs, extra-strength forgings, gas ports, skirt coatings, offset pins, and a variety of other features are available to insure each engine exceeds our customer’s expectations. Optimized skirt profiles minimize rock and provide long skirt life in stroker applications.

All machining is done on the newest CNC equipment to insure the tightest tolerances in the industry. Our Wiseco sport compact pistons are top of the line performance parts, built for the demanding consumer that wants nothing but the best. Some of our sport compact pistons are even matched with high quality NPR Steel nitrided rings with napier style 2nd rings.

Below are just some of the popular features found in our forged piston product lines:

Valve pocket designs allow maximum flow around the valve, allowing the use of oversized valves and high lift cams.
Piston crown shapes are designed to promote the maximum intake charge efficiency through a scavenging mixture ‘Cross Flow’ during intake and exhaust valve overlap. More fuel and air equals more horsepower.
Piston domes are designed for optimal quench during the compression/ combustion cycle, resulting in resistance to detonation and pre-ignition. The end product is longer engine life and increased horsepower potential.
Precision machined ring grooves with proper orifice/ accumulator volume feature calculated groove root diameters and axial widths, providing excellent surface finish and flatness, maximum ring seal, and minimized blow-by and oil consumption.

Wiseco Sport Compact Pistons Applications

Part Number	Application	Notes	Price	Buy Now
Acura
K568M86	2002-2011 Acura	K20 - 86mm Bore \| 9.0 Comp Ratio	$526.10 Shipped
K568M865	2002-2011 Acura	K20 - 86.5mm Bore \| 9.0 Comp Ratio	$526.10 Shipped
K568M87	2002-2011 Acura	K20 - 87mm Bore \| 9.0 Comp Ratio	$526.10 Shipped
K568M875	2002-2011 Acura	K20 - 87.5mm Bore \| 9.0 Comp Ratio K24 (With K20 Cylinder Head) - 87.5mm Bore \| 10.2 Comp Ratio	$526.10 Shipped
K568M88	2002-2011 Acura	K20 - 88mm Bore \| 9.0 Comp Ratio K24 (With K20 Cylinder Head) - 88mm Bore \| 10.2 Comp Ratio	$526.10 Shipped
K568M89	2002-2011 Acura	K20 - 89mm Bore \| 9.0 Comp Ratio K24 (With K20 Cylinder Head) - 89mm Bore \| 10.2 Comp Ratio	$526.10 Shipped
K631M86	2002-2011 Acura	K20 - 86mm Bore \| 9.8 Comp Ratio	$472.64 Shipped
K631M865	2002-2011 Acura	K20 - 86.5mm Bore \| 9.8 Comp Ratio	$472.64 Shipped
K631M87	2002-2011 Acura	K20 - 87mm Bore \| 9.8 Comp Ratio K24 (With K20 Cylinder Head) - 87mm Bore \| 11.1 Comp Ratio	$472.64 Shipped
K631M875	2002-2011 Acura	K20 - 87.5mm Bore \| 9.8 Comp Ratio K24 (With K20 Cylinder Head) - 87.5mm Bore \| 11.1 Comp Ratio	$472.64 Shipped
K634M87	2002-2011 Acura	K20 - 87mm Bore \| 11.0 Comp Ratio K24 (With K20 Cylinder Head) - 87mm Bore \| 12.5 Comp Ratio	$526.10 Shipped
K634M875	2002-2011 Acura	K20 - 87.5mm Bore \| 11.0 Comp Ratio K24 (With K20 Cylinder Head) - 87.5mm Bore \| 12.5 Comp Ratio	$526.10 Shipped
K634M89	2002-2011 Acura	K20 - 89mm Bore \| 11.0 Comp Ratio K24 (With K20 Cylinder Head) - 89mm Bore \| 12.5 Comp Ratio	$526.10 Shipped
K634M895	2002-2011 Acura	K20 - 89.5mm Bore \| 11.0 Comp Ratio K24 (With K20 Cylinder Head) - 89.5mm Bore \| 12.5 Comp Ratio	$526.10 Shipped
K573M86	2002-2011 Acura	K20 - 86mm Bore \| 11.7 Comp Ratio	$526.10 Shipped
K573M865	2002-2011 Acura	K20 - 86.5mm Bore \| 11.7 Comp Ratio	$526.10 Shipped
K573M87	2002-2011 Acura	K20 - 87mm Bore \| 11.7 Comp Ratio K24 (With K20 Cylinder Head) - 87mm Bore \| 13.7 Comp Ratio	$526.10 Shipped
K573M875	2002-2011 Acura	K20 - 87.5mm Bore \| 11.7 Comp Ratio K24 (With K20 Cylinder Head) - 87.5mm Bore \| 13.7 Comp Ratio	$526.10 Shipped
K573M88	2002-2011 Acura	K20 - 88mm Bore \| 11.7 Comp Ratio K24 (With K20 Cylinder Head) - 88mm Bore \| 13.7 Comp Ratio	$526.10 Shipped
K573M89	2002-2011 Acura	K20 - 89mm Bore \| 11.7 Comp Ratio K24 (With K20 Cylinder Head) - 89mm Bore \| 13.7 Comp Ratio	$526.10 Shipped
K650M86	2002-2011 Acura	K20 - 86mm Bore \| 12.4 Comp Ratio	$526.10 Shipped
K650M865	2002-2011 Acura	K20 - 86.5mm Bore \| 12.4 Comp Ratio	$526.10 Shipped
K650M87	2002-2011 Acura	K20 - 87mm Bore \| 12.4 Comp Ratio K24 (With K20 Cylinder Head) - 87mm Bore \| 14.2 Comp Ratio	$526.10 Shipped
K650M875	2002-2011 Acura	K20 - 87.5mm Bore \| 12.4 Comp Ratio K24 (With K20 Cylinder Head) - 87.5mm Bore \| 14.2 Comp Ratio	$526.10 Shipped
K650M88	2002-2011 Acura	K20 - 88mm Bore \| 12.4 Comp Ratio K24 (With K20 Cylinder Head) - 88mm Bore \| 14.2 Comp Ratio	$526.10 Shipped
K650M89	2002-2011 Acura	K20 - 89mm Bore \| 12.4 Comp Ratio K24 (With K20 Cylinder Head) - 89.5mm Bore \| 14.2 Comp Ratio	$526.10 Shipped
K622M87	2002-2011 Acura	K24 (With K20 Cylinder Head) - 87mm Bore \| 8.8 Comp Ratio	$526.10 Shipped
K622M875	2002-2011 Acura	K24 (With K20 Cylinder Head) - 87.5mm Bore \| 8.8 Comp Ratio	$526.10 Shipped
K541M81	1990-2001 Acura Integra GS/LS/RS	B18A1/B1 - 81mm Bore \| 8.3 - 8.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 8.8 - 9.0 Comp. Ratio B18C - 81mm Bore \| 8.6 - 8.9 Comp. Ratio	$526.10 Shipped
K541M815	1990-2001 Acura Integra GS/LS/RS	B18A1/B1 - 81.5mm Bore \| 8.3 - 8.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 8.8 - 9.0 Comp. Ratio B18C - 81.5mm Bore \| 8.6 - 8.9 Comp. Ratio	$526.10 Shipped
K541M82	1990-2001 Acura Integra GS/LS/RS	B18A1/B1 - 82mm Bore \| 8.3 - 8.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 8.8 - 9.0 Comp. Ratio B18C - 82mm Bore \| 8.6 - 8.9 Comp. Ratio	$526.10 Shipped
K542M81	1990-2001 Acura Integra GS/LS/RS	B16A (Must use at least .040'' thick gasket) - 81mm Bore \| 8.8 - 9.0 Comp. Ratio B17A1 - 81mm Bore \| 9.1 - 9.4 Comp. Ratio B18A1/B1 - 81mm Bore \| 9.3 - 9.8 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 9.8 - 10.2 Comp. Ratio B18C - 81mm Bore \| 9.7 - 10.2 Comp. Ratio	$472.64 Shipped
K542M815	1990-2001 Acura Integra GS/LS/RS	B16A (Must use at least .040'' thick gasket) - 81.5mm Bore \| 8.8 - 9.0 Comp. Ratio B17A1 - 81.5mm Bore \| 9.1 - 9.4 Comp. Ratio B18A1/B1 - 81.5mm Bore \| 9.3 - 9.8 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 9.8 - 10.2 Comp. Ratio B18C - 81.5mm Bore \| 9.7 - 10.2 Comp. Ratio	$472.64 Shipped
K542M82	1990-2001 Acura Integra GS/LS/RS	B16A (Must use at least .040'' thick gasket) - 82mm Bore \| 8.8 - 9.0 Comp. Ratio B17A1 - 82mm Bore \| 9.1 - 9.4 Comp. Ratio B18A1/B1 - 82mm Bore \| 9.3 - 9.8 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 9.8 - 10.2 Comp. Ratio B18C - 82mm Bore \| 9.7 - 10.2 Comp. Ratio	$472.64 Shipped
K566M81	1990-2001 Acura Integra GS/LS/RS	B16A (Must use at least .040'' thick gasket) - 81mm Bore \| 10.75 Comp. Ratio B17A1 - 81mm Bore \| 10.9 - 11.25 Comp. Ratio B18A1/B1 - 81mm Bore \| 11.1 - 11.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 11.8 - 12.0 Comp. Ratio B18C - 81mm Bore \| 11.8 - 12.25 Comp. Ratio	$526.10 Shipped
K566M815	1990-2001 Acura Integra GS/LS/RS	B16A (Must use at least .040'' thick gasket) - 81.5mm Bore \| 10.75 Comp. Ratio B17A1 - 81.5mm Bore \| 10.9 - 11.25 Comp. Ratio B18A1/B1 - 81.5mm Bore \| 11.1 - 11.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 11.8 - 12.0 Comp. Ratio B18C - 81.5mm Bore \| 11.8 - 12.25 Comp. Ratio	$526.10 Shipped
K566M82	1990-2001 Acura Integra GS/LS/RS	B16A (Must use at least .040'' thick gasket) - 82mm Bore \| 10.75 Comp. Ratio B17A1 - 82mm Bore \| 10.9 - 11.25 Comp. Ratio B18A1/B1 - 82mm Bore \| 11.1 - 11.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 11.8 - 12.0 Comp. Ratio B18C - 82mm Bore \| 11.8 - 12.25 Comp. Ratio	$526.10 Shipped
K593M81	1990-2001 Acura Integra GS/LS/RS	B16A (Must use at least .040'' thick gasket) - 81mm Bore \| 11.5 Comp. Ratio B17A1 - 81mm Bore \| 11.8 - 12 Comp. Ratio B18A1/B1 - 81mm Bore \| 11.8 - 12.4 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 12.8 - 13.0 Comp. Ratio B18C - 81mm Bore \| 12.5 - 13.2 Comp. Ratio	$540.30 Shipped
K593M815	1990-2001 Acura Integra GS/LS/RS	B16A (Must use at least .040'' thick gasket) - 81.5mm Bore \| 11.5 Comp. Ratio B17A1 - 81.5mm Bore \| 11.8 - 12 Comp. Ratio B18A1/B1 - 81.5mm Bore \| 11.8 - 12.4 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 12.8 - 13.0 Comp. Ratio B18C - 81.5mm Bore \| 12.5 - 13.2 Comp. Ratio	$540.30 Shipped
K593M82	1990-2001 Acura Integra GS/LS/RS	B16A (Must use at least .040'' thick gasket) - 82mm Bore \| 11.5 Comp. Ratio B17A1 - 82mm Bore \| 11.8 - 12 Comp. Ratio B18A1/B1 - 82mm Bore \| 11.8 - 12.4 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 12.8 - 13.0 Comp. Ratio B18C - 82mm Bore \| 12.5 - 13.2 Comp. Ratio	$540.30 Shipped
K542M81	1992-1993 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 81mm Bore \| 8.8 - 9.0 Comp. Ratio B17A1 - 81mm Bore \| 9.1 - 9.4 Comp. Ratio B18A1/B1 - 81mm Bore \| 9.3 - 9.8 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 9.8 - 10.2 Comp. Ratio B18C - 81mm Bore \| 9.7 - 10.2 Comp. Ratio	$472.64 Shipped
K542M815	1992-1993 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 81.5mm Bore \| 8.8 - 9.0 Comp. Ratio B17A1 - 81.5mm Bore \| 9.1 - 9.4 Comp. Ratio B18A1/B1 - 81.5mm Bore \| 9.3 - 9.8 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 9.8 - 10.2 Comp. Ratio B18C - 81.5mm Bore \| 9.7 - 10.2 Comp. Ratio	$472.64 Shipped
K542M82	1992-1993 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 82mm Bore \| 8.8 - 9.0 Comp. Ratio B17A1 - 82mm Bore \| 9.1 - 9.4 Comp. Ratio B18A1/B1 - 82mm Bore \| 9.3 - 9.8 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 9.8 - 10.2 Comp. Ratio B18C - 82mm Bore \| 9.7 - 10.2 Comp. Ratio	$472.64 Shipped
K566M81	1992-1993 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 81mm Bore \| 10.75 Comp. Ratio B17A1 - 81mm Bore \| 10.9 - 11.25 Comp. Ratio B18A1/B1 - 81mm Bore \| 11.1 - 11.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 11.8 - 12.0 Comp. Ratio B18C - 81mm Bore \| 11.8 - 12.25 Comp. Ratio	$526.10 Shipped
K566M815	1992-1993 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 81.5mm Bore \| 10.75 Comp. Ratio B17A1 - 81.5mm Bore \| 10.9 - 11.25 Comp. Ratio B18A1/B1 - 81.5mm Bore \| 11.1 - 11.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 11.8 - 12.0 Comp. Ratio B18C - 81.5mm Bore \| 11.8 - 12.25 Comp. Ratio	$526.10 Shipped
K566M82	1992-1993 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 82mm Bore \| 10.75 Comp. Ratio B17A1 - 82mm Bore \| 10.9 - 11.25 Comp. Ratio B18A1/B1 - 82mm Bore \| 11.1 - 11.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 11.8 - 12.0 Comp. Ratio B18C - 82mm Bore \| 11.8 - 12.25 Comp. Ratio	$526.10 Shipped
K593M81	1992-1993 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 81mm Bore \| 11.5 Comp. Ratio B17A1 - 81mm Bore \| 11.8 - 12 Comp. Ratio B18A1/B1 - 81mm Bore \| 11.8 - 12.4 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 12.8 - 13.0 Comp. Ratio B18C - 81mm Bore \| 12.5 - 13.2 Comp. Ratio	$540.30 Shipped
K593M815	1992-1993 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 81.5mm Bore \| 11.5 Comp. Ratio B17A1 - 81.5mm Bore \| 11.8 - 12 Comp. Ratio B18A1/B1 - 81.5mm Bore \| 11.8 - 12.4 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 12.8 - 13.0 Comp. Ratio B18C - 81.5mm Bore \| 12.5 - 13.2 Comp. Ratio	$540.30 Shipped
K593M82	1992-1993 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 82mm Bore \| 11.5 Comp. Ratio B17A1 - 82mm Bore \| 11.8 - 12 Comp. Ratio B18A1/B1 - 82mm Bore \| 11.8 - 12.4 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 12.8 - 13.0 Comp. Ratio B18C - 82mm Bore \| 12.5 - 13.2 Comp. Ratio	$540.30 Shipped
K541M81	1994-2001 Acura Integra GSR	B18A1/B1 - 81mm Bore \| 8.3 - 8.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 8.8 - 9.0 Comp. Ratio B18C - 81mm Bore \| 8.6 - 8.9 Comp. Ratio	$526.10 Shipped
K541M815	1994-2001 Acura Integra GSR	B18A1/B1 - 81.5mm Bore \| 8.3 - 8.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 8.8 - 9.0 Comp. Ratio B18C - 81.5mm Bore \| 8.6 - 8.9 Comp. Ratio	$526.10 Shipped
K541M82	1994-2001 Acura Integra GSR	B18A1/B1 - 82mm Bore \| 8.3 - 8.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 8.8 - 9.0 Comp. Ratio B18C - 82mm Bore \| 8.6 - 8.9 Comp. Ratio	$526.10 Shipped
K542M81	1994-2001 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 81mm Bore \| 8.8 - 9.0 Comp. Ratio B17A1 - 81mm Bore \| 9.1 - 9.4 Comp. Ratio B18A1/B1 - 81mm Bore \| 9.3 - 9.8 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 9.8 - 10.2 Comp. Ratio B18C - 81mm Bore \| 9.7 - 10.2 Comp. Ratio	$472.64 Shipped
K542M815	1994-2001 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 81.5mm Bore \| 8.8 - 9.0 Comp. Ratio B17A1 - 81.5mm Bore \| 9.1 - 9.4 Comp. Ratio B18A1/B1 - 81.5mm Bore \| 9.3 - 9.8 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 9.8 - 10.2 Comp. Ratio B18C - 81.5mm Bore \| 9.7 - 10.2 Comp. Ratio	$472.64 Shipped
K542M82	1994-2001 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 82mm Bore \| 8.8 - 9.0 Comp. Ratio B17A1 - 82mm Bore \| 9.1 - 9.4 Comp. Ratio B18A1/B1 - 82mm Bore \| 9.3 - 9.8 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 9.8 - 10.2 Comp. Ratio B18C - 82mm Bore \| 9.7 - 10.2 Comp. Ratio	$472.64 Shipped
K566M81	1994-2001 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 81mm Bore \| 10.75 Comp. Ratio B17A1 - 81mm Bore \| 10.9 - 11.25 Comp. Ratio B18A1/B1 - 81mm Bore \| 11.1 - 11.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 11.8 - 12.0 Comp. Ratio B18C - 81mm Bore \| 11.8 - 12.25 Comp. Ratio	$526.10 Shipped
K566M815	1994-2001 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 81.5mm Bore \| 10.75 Comp. Ratio B17A1 - 81.5mm Bore \| 10.9 - 11.25 Comp. Ratio B18A1/B1 - 81.5mm Bore \| 11.1 - 11.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 11.8 - 12.0 Comp. Ratio B18C - 81.5mm Bore \| 11.8 - 12.25 Comp. Ratio	$526.10 Shipped
K566M82	1994-2001 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 82mm Bore \| 10.75 Comp. Ratio B17A1 - 82mm Bore \| 10.9 - 11.25 Comp. Ratio B18A1/B1 - 82mm Bore \| 11.1 - 11.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 11.8 - 12.0 Comp. Ratio B18C - 82mm Bore \| 11.8 - 12.25 Comp. Ratio	$526.10 Shipped
K593M81	1994-2001 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 81mm Bore \| 11.5 Comp. Ratio B17A1 - 81mm Bore \| 11.8 - 12 Comp. Ratio B18A1/B1 - 81mm Bore \| 11.8 - 12.4 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 12.8 - 13.0 Comp. Ratio B18C - 81mm Bore \| 12.5 - 13.2 Comp. Ratio	$540.30 Shipped
K593M815	1994-2001 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 81.5mm Bore \| 11.5 Comp. Ratio B17A1 - 81.5mm Bore \| 11.8 - 12 Comp. Ratio B18A1/B1 - 81.5mm Bore \| 11.8 - 12.4 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 12.8 - 13.0 Comp. Ratio B18C - 81.5mm Bore \| 12.5 - 13.2 Comp. Ratio	$540.30 Shipped
K593M82	1994-2001 Acura Integra GSR	B16A (Must use at least .040'' thick gasket) - 82mm Bore \| 11.5 Comp. Ratio B17A1 - 82mm Bore \| 11.8 - 12 Comp. Ratio B18A1/B1 - 82mm Bore \| 11.8 - 12.4 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 12.8 - 13.0 Comp. Ratio B18C - 82mm Bore \| 12.5 - 13.2 Comp. Ratio	$540.30 Shipped
Honda
K568M86	2002-2011 Honda	K20 - 86mm Bore \| 9.0 Comp Ratio	$526.10 Shipped
K568M865	2002-2011 Honda	K20 - 86.5mm Bore \| 9.0 Comp Ratio	$526.10 Shipped
K568M875	2002-2011 Honda	K20 - 87.5mm Bore \| 9.0 Comp Ratio K24 (With K20 Cylinder Head) - 87.5mm Bore \| 10.2 Comp Ratio	$526.10 Shipped
K568M88	2002-2011 Honda	K20 - 88mm Bore \| 9.0 Comp Ratio K24 (With K20 Cylinder Head) - 88mm Bore \| 10.2 Comp Ratio	$526.10 Shipped
K568M89	2002-2011 Honda	K20 - 89mm Bore \| 9.0 Comp Ratio K24 (With K20 Cylinder Head) - 89mm Bore \| 10.2 Comp Ratio	$526.10 Shipped
K631M86	2002-2011 Honda	K20 - 86mm Bore \| 9.8 Comp Ratio	$472.64 Shipped
K631M865	2002-2011 Honda	K20 - 86.5mm Bore \| 9.8 Comp Ratio	$472.64 Shipped
K631M87	2002-2011 Honda	K20 - 87mm Bore \| 9.8 Comp Ratio K24 (With K20 Cylinder Head) - 87mm Bore \| 11.1 Comp Ratio	$472.64 Shipped
K631M875	2002-2011 Honda	K20 - 87.5mm Bore \| 9.8 Comp Ratio K24 (With K20 Cylinder Head) - 87.5mm Bore \| 11.1 Comp Ratio	$472.64 Shipped
K634M87	2002-2011 Honda	K20 - 87mm Bore \| 11.0 Comp Ratio K24 (With K20 Cylinder Head) - 87mm Bore \| 12.5 Comp Ratio	$526.10 Shipped
K634M875	2002-2011 Honda	K20 - 87.5mm Bore \| 11.0 Comp Ratio K24 (With K20 Cylinder Head) - 87.5mm Bore \| 12.5 Comp Ratio	$526.10 Shipped
K634M89	2002-2011 Honda	K20 - 89mm Bore \| 11.0 Comp Ratio K24 (With K20 Cylinder Head) - 89mm Bore \| 12.5 Comp Ratio	$526.10 Shipped
K634M895	2002-2011 Honda	K20 - 89.5mm Bore \| 11.0 Comp Ratio K24 (With K20 Cylinder Head) - 89.5mm Bore \| 12.5 Comp Ratio	$526.10 Shipped
K573M86	2002-2011 Honda	K20 - 86mm Bore \| 11.7 Comp Ratio	$526.10 Shipped
K573M865	2002-2011 Honda	K20 - 86.5mm Bore \| 11.7 Comp Ratio	$526.10 Shipped
K573M87	2002-2011 Honda	K20 - 87mm Bore \| 11.7 Comp Ratio K24 (With K20 Cylinder Head) - 87mm Bore \| 13.7 Comp Ratio	$526.10 Shipped
K573M875	2002-2011 Honda	K20 - 87.5mm Bore \| 11.7 Comp Ratio K24 (With K20 Cylinder Head) - 87.5mm Bore \| 13.7 Comp Ratio	$526.10 Shipped
K573M88	2002-2011 Honda	K20 - 88mm Bore \| 11.7 Comp Ratio K24 (With K20 Cylinder Head) - 88mm Bore \| 13.7 Comp Ratio	$526.10 Shipped
K573M89	2002-2011 Honda	K20 - 89mm Bore \| 11.7 Comp Ratio K24 (With K20 Cylinder Head) - 89mm Bore \| 13.7 Comp Ratio	$526.10 Shipped
K650M86	2002-2011 Honda	K20 - 86mm Bore \| 12.4 Comp Ratio	$526.10 Shipped
K650M865	2002-2011 Honda	K20 - 86.5mm Bore \| 12.4 Comp Ratio	$526.10 Shipped
K650M87	2002-2011 Honda	K20 - 87mm Bore \| 12.4 Comp Ratio K24 (With K20 Cylinder Head) - 87mm Bore \| 14.2 Comp Ratio	$526.10 Shipped
K650M875	2002-2011 Honda	K20 - 87.5mm Bore \| 12.4 Comp Ratio K24 (With K20 Cylinder Head) - 87.5mm Bore \| 14.2 Comp Ratio	$526.10 Shipped
K650M88	2002-2011 Honda	K20 - 88mm Bore \| 12.4 Comp Ratio K24 (With K20 Cylinder Head) - 88mm Bore \| 14.2 Comp Ratio	$526.10 Shipped
K650M89	2002-2011 Honda	K20 - 89mm Bore \| 12.4 Comp Ratio K24 (With K20 Cylinder Head) - 89.5mm Bore \| 14.2 Comp Ratio	$526.10 Shipped
K622M87	2002-2011 Honda	K24 (With K20 Cylinder Head) - 87mm Bore \| 8.8 Comp Ratio	$526.10 Shipped
K622M875	2002-2011 Honda	K24 (With K20 Cylinder Head) - 87.5mm Bore \| 8.8 Comp Ratio	$526.10 Shipped
K568M87	2002-2011 Honda	K20 - 87mm Bore \| 9.0 Comp Ratio	$526.10 Shipped
K546M755	1992-2000 Honda Civic	D16Z6 - D16Y7 - 75.5mm Bore \| 8.5 Comp Ratio	$526.10 Shipped
K543M75	1996-2000 Honda Civic	D16Y8 - 75mm Bore \| 8.5 - 9.0 Comp Ratio	$526.10 Shipped
K543M755	1996-2000 Honda Civic	D16Y8 - 75.5mm Bore \| 8.5 - 9.0 Comp Ratio	$526.10 Shipped
K542M81	1999-2000 Honda Civic Si	B16A (Must use at least .040'' thick gasket) - 81mm Bore \| 8.8 - 9.0 Comp. Ratio B17A1 - 81mm Bore \| 9.1 - 9.4 Comp. Ratio B18A1/B1 - 81mm Bore \| 9.3 - 9.8 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 9.8 - 10.2 Comp. Ratio B18C - 81mm Bore \| 9.7 - 10.2 Comp. Ratio	$472.64 Shipped
K542M815	1999-2000 Honda Civic Si	B16A (Must use at least .040'' thick gasket) - 81.5mm Bore \| 8.8 - 9.0 Comp. Ratio B17A1 - 81.5mm Bore \| 9.1 - 9.4 Comp. Ratio B18A1/B1 - 81.5mm Bore \| 9.3 - 9.8 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 9.8 - 10.2 Comp. Ratio B18C - 81.5mm Bore \| 9.7 - 10.2 Comp. Ratio	$472.64 Shipped
K542M82	1999-2000 Honda Civic Si	B16A (Must use at least .040'' thick gasket) - 82mm Bore \| 8.8 - 9.0 Comp. Ratio B17A1 - 82mm Bore \| 9.1 - 9.4 Comp. Ratio B18A1/B1 - 82mm Bore \| 9.3 - 9.8 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 9.8 - 10.2 Comp. Ratio B18C - 82mm Bore \| 9.7 - 10.2 Comp. Ratio	$472.64 Shipped
K566M81	1999-2000 Honda Civic Si	B16A (Must use at least .040'' thick gasket) - 81mm Bore \| 10.75 Comp. Ratio B17A1 - 81mm Bore \| 10.9 - 11.25 Comp. Ratio B18A1/B1 - 81mm Bore \| 11.1 - 11.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 11.8 - 12.0 Comp. Ratio B18C - 81mm Bore \| 11.8 - 12.25 Comp. Ratio	$526.10 Shipped
K566M815	1999-2000 Honda Civic Si	B16A (Must use at least .040'' thick gasket) - 81.5mm Bore \| 10.75 Comp. Ratio B17A1 - 81.5mm Bore \| 10.9 - 11.25 Comp. Ratio B18A1/B1 - 81.5mm Bore \| 11.1 - 11.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 11.8 - 12.0 Comp. Ratio B18C - 81.5mm Bore \| 11.8 - 12.25 Comp. Ratio	$526.10 Shipped
K566M82	1999-2000 Honda Civic Si	B16A (Must use at least .040'' thick gasket) - 82mm Bore \| 10.75 Comp. Ratio B17A1 - 82mm Bore \| 10.9 - 11.25 Comp. Ratio B18A1/B1 - 82mm Bore \| 11.1 - 11.6 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 11.8 - 12.0 Comp. Ratio B18C - 82mm Bore \| 11.8 - 12.25 Comp. Ratio	$526.10 Shipped
K593M81	1999-2000 Honda Civic Si	B16A (Must use at least .040'' thick gasket) - 81mm Bore \| 11.5 Comp. Ratio B17A1 - 81mm Bore \| 11.8 - 12 Comp. Ratio B18A1/B1 - 81mm Bore \| 11.8 - 12.4 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81mm Bore \| 12.8 - 13.0 Comp. Ratio B18C - 81mm Bore \| 12.5 - 13.2 Comp. Ratio	$540.30 Shipped
K593M815	1999-2000 Honda Civic Si	B16A (Must use at least .040'' thick gasket) - 81.5mm Bore \| 11.5 Comp. Ratio B17A1 - 81.5mm Bore \| 11.8 - 12 Comp. Ratio B18A1/B1 - 81.5mm Bore \| 11.8 - 12.4 Comp. Ratio B18A1/B1 with B16A VTEC Head - 81.5mm Bore \| 12.8 - 13.0 Comp. Ratio B18C - 81.5mm Bore \| 12.5 - 13.2 Comp. Ratio	$540.30 Shipped
K593M82	1999-2000 Honda Civic Si	B16A (Must use at least .040'' thick gasket) - 82mm Bore \| 11.5 Comp. Ratio B17A1 - 82mm Bore \| 11.8 - 12 Comp. Ratio B18A1/B1 - 82mm Bore \| 11.8 - 12.4 Comp. Ratio B18A1/B1 with B16A VTEC Head - 82mm Bore \| 12.8 - 13.0 Comp. Ratio B18C - 82mm Bore \| 12.5 - 13.2 Comp. Ratio	$540.30 Shipped
K624M75	2001-2005 Honda Civic	D17 - 75mm Bore \| 8.8 Comp Ratio	$526.10 Shipped
K624M755	2001-2005 Honda Civic	D17 - 75.5mm Bore \| 8.8 Comp Ratio	$526.10 Shipped
K545M84	1997-2002 Honda CR-V	B20B With VTEC Head - 84mm Bore \| 8.4 - 8.8 Comp Ratio	$526.10 Shipped
K545M845	1997-2002 Honda CR-V	B20B With VTEC Head - 84.5mm Bore \| 8.4 - 8.8 Comp Ratio	$526.10 Shipped
K545M85	1997-2002 Honda CR-V	B20B With VTEC Head - 85mm Bore \| 8.4 - 8.8 Comp Ratio	$526.10 Shipped
K649M84	1997-2002 Honda CR-V	B20B With VTEC Head - 84mm Bore \| 9.3 - 9.6 Comp Ratio	$526.10 Shipped
K649M845	1997-2002 Honda CR-V	B20B With VTEC Head - 84.5mm Bore \| 9.3 - 9.6 Comp Ratio	$526.10 Shipped
K649M85	1997-2002 Honda CR-V	B20B With VTEC Head - 85mm Bore \| 9.3 - 9.6 Comp Ratio	$526.10 Shipped
K623M84	1997-2002 Honda CR-V	B20B With VTEC Head - 84mm Bore \| 10.4 - 10.9 Comp Ratio	$472.64 Shipped
K623M845	1997-2002 Honda CR-V	B20B With VTEC Head - 84.5mm Bore \| 10.4 - 10.9 Comp Ratio	$472.64 Shipped
K567M84	1997-2002 Honda CR-V	B20B With VTEC Head - 84mm Bore \| 11.3 - 12.0 Comp Ratio	$540.30 Shipped
K567M845	1997-2002 Honda CR-V	B20B With VTEC Head - 84.5mm Bore \| 11.3 - 12.0 Comp Ratio	$540.30 Shipped
K567M85	1997-2002 Honda CR-V	B20B With VTEC Head - 85mm Bore \| 11.3 - 12.0 Comp Ratio	$540.30 Shipped
K594M84	1997-2002 Honda CR-V	B20B With VTEC Head - 84mm Bore \| 13.2 - 14.2 Comp Ratio	$540.30 Shipped
K594M845	1997-2002 Honda CR-V	B20B With VTEC Head - 84.5mm Bore \| 13.2 - 14.2 Comp Ratio	$540.30 Shipped
K594M85	1997-2002 Honda CR-V	B20B With VTEC Head - 85mm Bore \| 13.2 - 14.2 Comp Ratio	$540.30 Shipped
K594M855	1997-2002 Honda CR-V	B20B With VTEC Head - 85.5mm Bore \| 13.2 - 14.2 Comp Ratio	$540.30 Shipped
K594M86	1997-2002 Honda CR-V	B20B With VTEC Head - 86mm Bore \| 13.2 - 14.2 Comp Ratio	$540.30 Shipped
K544M87	1992-2001 Honda Prelude	H22 (FRM cylinders MUST run SLEEVED bores) - 87mm Bore \| 8.5 Comp Ratio H23 (To be run with .030'' piston-to-head minimum - Requires .040'' gasket min.) - 87mm Bore \| 9.3 Comp Ratio	$526.10 Shipped
K544M88	1992-2001 Honda Prelude	H22 (FRM cylinders MUST run SLEEVED bores) - 88mm Bore \| 8.5 Comp Ratio H23 (To be run with .030'' piston-to-head minimum - Requires .040'' gasket min.) - 88mm Bore \| 9.3 Comp Ratio	$526.10 Shipped
K544M89	1992-2001 Honda Prelude	H22 (FRM cylinders MUST run SLEEVED bores) - 89mm Bore \| 8.5 Comp Ratio H23 (To be run with .030'' piston-to-head minimum - Requires .040'' gasket min.) - 89mm Bore \| 9.3 Comp Ratio	$526.10 Shipped
K572M87	1992-2001 Honda Prelude	H22 (FRM cylinders MUST run SLEEVED bores) - 87mm Bore \| 11.5 Comp Ratio H23 (To be run with .030'' piston-to-head minimum - Requires .040'' gasket min.) - 87mm Bore \| 13 Comp Ratio	$540.30 Shipped
K572M88	1992-2001 Honda Prelude	H22 (FRM cylinders MUST run SLEEVED bores) - 88mm Bore \| 11.5 Comp Ratio H23 (To be run with .030'' piston-to-head minimum - Requires .040'' gasket min.) - 88mm Bore \| 13 Comp Ratio	$540.30 Shipped
K572M89	1992-2001 Honda Prelude	H22 (FRM cylinders MUST run SLEEVED bores) - 89mm Bore \| 11.5 Comp Ratio H23 (To be run with .030'' piston-to-head minimum - Requires .040'' gasket min.) - 89mm Bore \| 13 Comp Ratio	$540.30 Shipped
K544M87	1992-1996 Honda Prelude	H22 (FRM cylinders MUST run SLEEVED bores) - 87mm Bore \| 8.5 Comp Ratio H23 (To be run with .030'' piston-to-head minimum - Requires .040'' gasket min.) - 87mm Bore \| 9.3 Comp Ratio	$526.10 Shipped
K544M88	1992-1996 Honda Prelude	H22 (FRM cylinders MUST run SLEEVED bores) - 88mm Bore \| 8.5 Comp Ratio H23 (To be run with .030'' piston-to-head minimum - Requires .040'' gasket min.) - 88mm Bore \| 9.3 Comp Ratio	$526.10 Shipped
K544M89	1992-1996 Honda Prelude	H22 (FRM cylinders MUST run SLEEVED bores) - 89mm Bore \| 8.5 Comp Ratio H23 (To be run with .030'' piston-to-head minimum - Requires .040'' gasket min.) - 89mm Bore \| 9.3 Comp Ratio	$526.10 Shipped
K572M87	1992-1996 Honda Prelude	H22 (FRM cylinders MUST run SLEEVED bores) - 87mm Bore \| 11.5 Comp Ratio H23 (To be run with .030'' piston-to-head minimum - Requires .040'' gasket min.) - 87mm Bore \| 13 Comp Ratio	$540.30 Shipped
K572M88	1992-1996 Honda Prelude	H22 (FRM cylinders MUST run SLEEVED bores) - 88mm Bore \| 11.5 Comp Ratio H23 (To be run with .030'' piston-to-head minimum - Requires .040'' gasket min.) - 88mm Bore \| 13 Comp Ratio	$540.30 Shipped
K572M89	1992-1996 Honda Prelude	H22 (FRM cylinders MUST run SLEEVED bores) - 89mm Bore \| 11.5 Comp Ratio H23 (To be run with .030'' piston-to-head minimum - Requires .040'' gasket min.) - 89mm Bore \| 13 Comp Ratio	$540.30 Shipped
K632M87	2000-2003 Honda S2000	F20 - 87mm Bore \| 8.5 Comp Ratio F22 - 87mm Bore \| 9.0 Comp Ratio	$526.10 Shipped
K632M875	2000-2003 Honda S2000	F20 - 87.5mm Bore \| 8.5 Comp Ratio F22 - 87.5mm Bore \| 9.0 Comp Ratio	$526.10 Shipped
K632M87	2004-2009 Honda S2000	F20 - 87mm Bore \| 8.5 Comp Ratio F22 - 87mm Bore \| 9.0 Comp Ratio	$526.10 Shipped
K632M875	2004-2009 Honda S2000	F20 - 87.5mm Bore \| 8.5 Comp Ratio F22 - 87.5mm Bore \| 9.0 Comp Ratio	$526.10 Shipped

Don't see your application? We probably have it or can get it, click here.

Wiseco Sport Compact Pistons Reviews

There are currently no reviews for this product. Be the first by reviewing Wiseco Sport Compact Pistons below.

Rating:
Your Name:
Review Title:
Review:

Wiseco Sport Compact Pistons

Wiseco Sport Compact Pistons Applications

Part Number

Application

Notes

Price

Buy Now

Wiseco Sport Compact Pistons Reviews