1999 Acura Interga GSR Build Thread/Progress #Keepitstock

ASGSR

New Member
R13 said:
:thumbs up

Keeping the tan interior, or do you plan on swapping it?
Click to expand...
Im actually doing a black conversion as well.

Finally got the chance to finish doing all the prep work on the jambs, engine bay, and the trunk. After a good 2 coats of primer in the trunk i scuffed all of my jambs with 400 grit and then a red scotch bright and some sanding paste and then went through the masking stage a put the car in the booth to get the inside painted! The color I ended up going was with Sahara Stone Metallic (KUH) from Nissan or " Gold" like my instructor calls it. I also went ahead and cut in my fenders doors underside of the hood and my hatch to get it out of the way. Here are the pics.
IMG_3062 by adielsanchez23, on FlickrIMG_3067 by adielsanchez23, on FlickrIMG_3066 by adielsanchez23, on FlickrIMG_3068 by adielsanchez23, on FlickrIMG_3061 by adielsanchez23, on FlickrIMG_3070 by adielsanchez23, on FlickrIMG_3071 by adielsanchez23, on FlickrIMG_3072 by adielsanchez23, on FlickrIMG_3073 by adielsanchez23, on FlickrIMG_3087 by adielsanchez23, on FlickrIMG_3088 by
adielsanchez23, on FlickrIMG_3091 by adielsanchez23, on FlickrIMG_3079 by adielsanchez23, on FlickrIMG_3080 by adielsanchez23, on FlickrIMG_8721 by adielsanchez23, on FlickrIMG_8724 by adielsanchez23, on FlickrIMG_8725 by adielsanchez23, on FlickrIMG_8726 by adielsanchez23, on FlickrIMG_8727 by adielsanchez23, on FlickrIMG_8730 by adielsanchez23, on FlickrIMG_8731 by adielsanchez23, on FlickrIMG_8732 by adielsanchez23, on FlickrIMG_8733 by adielsanchez23, on FlickrIMG_8734 by adielsanchez23, on FlickrIMG_8735 by adielsanchez23, on FlickrIMG_8736 by adielsanchez23, on FlickrIMG_8737 by adielsanchez23, on Flickr
 
Last edited:

LsTeg97

Power_Hitter
Looks great man! I always love looking at progress paint. You have to have time and patience for this. Good Job.
 


ASGSR

New Member
LsTeg97 said:
Looks great man! I always love looking at progress paint. You have to have time and patience for this. Good Job.
Click to expand...
Patience for sure man! Unfortunately, when i went to spray the car I ran into some problems. Ended up having major paint issues with fish eyes and solvent pop due to a rookie mistake. Painted the car in the afternoon and it looked perfect! When I came back in the morning the whole car was destroyed. Due to this I lost a lot of motivation on the car, seems like everything was just going wrong for me. I wasn't going to give up that easy though since I do love this car so I took it to my new shop and started stripping it! I basically have to completely take all the paint off with 40 grit and re block the entire car to try and get it as straight as possible before primer because sanding a car down with a DA makes the panels wavy.

Here are a few pictures of my home made paint booth and a few of my spray guns!
IMG_9588 by adielsanchez23, on FlickrIMG_9586 by adielsanchez23, on FlickrIMG_9579 by adielsanchez23, on FlickrIMG_9584 by adielsanchez23, on FlickrIMG_9582 by adielsanchez23, on Flickr
 
You must log in or register to reply here.
Top