b18b1 with gsr pistons?

lowerclassdc2

New Member
hey guys so i have a set of GSR pistons and i was going to put them in my stock B18b1 but didnt know if they would just go right in with no problems or modifications so will they fit right in?
 

dsizer89

New Member
using just gsr psitons on ls rods ?? if your using gsr rods and pistons you will need a gsr crank
 


95B18BTurbo

New Member
I would shell out the extra money and go for some PR3's or P73's
 

lowerclassdc2

New Member
i have gsr pistons with the rods so if i wanted to put them in my car i would need a gsr crank too?
 


95B18BTurbo

New Member
I'm going to be that dude, but you need to research bro before you get into this. Crank and rods need to match, so yes.
 

Physh1

New Member
ls blocks & c/c1 blocks have different deck heights as well I believe. A quick google search showed 3 or 4 really good links. Get to reading :-D
 

DonJulio

Reppin' tha NW
thanks muckman thats exactly what i needed im going to do that
Exactly, same bore different stroke. It's longer on the b18b/b20.

Which makes me believe building an ls vtec with a gsr crank is the way to go. It's balanced for higher rpms and the shorter r/s ratio takes less stress off the cylinder walls.

I think I'm into something here.
 

94RS

No fucks given.
I'd say do ls vtec to but at that point you might as well just buy a gsr
Don't give performance advice if you don't know what the hell you're talking about.
 


Top