Cold Air Intake problem

[Roger91GSR]

I ordered a cold air intake and it only has 2 hose attachments. My factory setup has 3 hoses that attach to the rubber intake hose. One is about 1/2 inch hose and the other 2 are very small, about the size of a pencil. Can the cold air intake still be used and if so, what do you do with the one extra small hose coming from throttle body area?

Thanks in advance

 

[94RS]

Pictures would help a lot...

But if it's what I'm thinking, I'll try to explain what's going on.


If you look at mine, there's a metal piece above the oil cap that runs from the valve cover into the OEM intake arm.

The little 1/2in piece is to replace the OEM one on the valve cover's PCV valve. The longer one is supposed to be cut to size and attached at the other end so it can attach to the nipple on the intake arm.

 

[Roger91GSR]

I have a picture of the issue on my desktop but can't get it to upload onto this post. I apologize but I have not uploaded pictures to the threads before. Any idea how?

 

[Roger91GSR]

There is a box at the bottom of my page Posting Rules that says "You may not post attachments". Anyway to get around that so I can post a picture of my problem?

 

[94RS]

Flickr, photobucket or Imgur for hosting images.

 

[Roger91GSR]

Here is a link to a similar looking setup. Notice the two hoses on left side of throttle body and to the left of the Red hose, these both connect to the back of the factory intake tubing. They are very small hoses. You will probably have to copy and paste this URL. https://www.bing.com/images/search?q=91+integra+b18a1&view=detailv2&&id=DAB69A75535B1F433B56194E4DB39D6C59566C65&selectedIndex=25&ccid=0imSyVOE&simid=608002086655034454&thid=OIP.Md22992c953841e1106bed5b11b06ee52o0&ajaxhist=0