well its confirmed. my mounts are bent and pushed the motor back and towards the driver side. thus the big gap on the passenger side. it should be nice tight clearance of 1 inch with the hasports seen on another car at SCM. this happened most likely from being lowered and adding ontop the issues with the low k24 oil pan clearance.
it all depends on which version and brand of mounts you have, currently mines are a "older" generation mounts which is a tad weak. aside from innovative vs hasport, the latest version of hasport is way beefier and thicker billet with better welds.so its time for an upgrade.
with that said... i need to free up some cash.
FS/FT: Mugen 16x7 5x114.3