DC2_Project
New Member
2001 Acura Integra LS Turbo
Engine:
USDM LS B18B1
Garrett T04B Ball Bearing Turbo
HKS Dual Turbo Exhaust
HKS Turbo Manifold
HKS 3" Downpipe
Machined LS Cams for TURBO by BLOX in fremont
AEM Engine Management System [Plug and play]
TiAL Wastegate 14.5 PSI [Deltagate 7 PSI for daily driving]
Vortech 12:1 Fuel Pressure Regulator
JE Titanium Rods and Rings
Drag High Flow front mount intercooler
GReddy Type-A Blow Off Valve
Drag high flow intercooler pipes
AEM High pressure/High volume internal fuel pump
Maxspeed Upper strut tie bar
EXEDY Stage III clutch and flywheel
APEXi Turbo Timer
Exterior:
Skunk2 Coil Overs
Skunk2 Race springs and struts
Rims & Tires
17" Motegi MR7
Yokohama 215 40/ZR17
Specs
1/4 Mile: 12.529 @ 112.393 MPH [12.5 PSI]
305 WHP [12 PSI 100 Octane]
260'lb torque
Interior
AC Autotechnic Boost Gauge
AC Autotechnic Air/Fuel ratio gauge
APEXi Turbo Timer
Whistler radar detector
Sound System
Kenwood KDC MP3/WMA/CDRW 54x4 head unit
Sony XPLOD 1000 Watt amp
2 12" JL Audio Subs
Custom PHEONIX subsystems enclosure
Engine:
USDM LS B18B1
Garrett T04B Ball Bearing Turbo
HKS Dual Turbo Exhaust
HKS Turbo Manifold
HKS 3" Downpipe
Machined LS Cams for TURBO by BLOX in fremont
AEM Engine Management System [Plug and play]
TiAL Wastegate 14.5 PSI [Deltagate 7 PSI for daily driving]
Vortech 12:1 Fuel Pressure Regulator
JE Titanium Rods and Rings
Drag High Flow front mount intercooler
GReddy Type-A Blow Off Valve
Drag high flow intercooler pipes
AEM High pressure/High volume internal fuel pump
Maxspeed Upper strut tie bar
EXEDY Stage III clutch and flywheel
APEXi Turbo Timer
Exterior:
Skunk2 Coil Overs
Skunk2 Race springs and struts
Rims & Tires
17" Motegi MR7
Yokohama 215 40/ZR17
Specs
1/4 Mile: 12.529 @ 112.393 MPH [12.5 PSI]
305 WHP [12 PSI 100 Octane]
260'lb torque
Interior
AC Autotechnic Boost Gauge
AC Autotechnic Air/Fuel ratio gauge
APEXi Turbo Timer
Whistler radar detector
Sound System
Kenwood KDC MP3/WMA/CDRW 54x4 head unit
Sony XPLOD 1000 Watt amp
2 12" JL Audio Subs
Custom PHEONIX subsystems enclosure