The Harley Build Thread

5150KDC2

New Member
The Start

Off to paint

Motor time!!:twisted:



202 Valves on a Harley.... WHAT!!


100hp and 110ft/lb at the wheels, and only a 95c.i.

Custom mount oil cooler

Paint




not done yet

The BEAST finished.
 

5150KDC2

New Member
So I broke the chain tensioner, and replaced it and put in a new clutch hub. Got tired of the clutch slipping so I went with a variable hub. Did that and went for a ride, and came back 8 hours later. The next day I found that the rear belt pully had 4 out of 5 broken bolts that just snapped off. So now its back on the jack waiting for a new wheel and pully. :(




The bolts
 

5150KDC2

New Member
Make:
2001 Harley Davidson Wideglide

Engine:
88 C.I. cylinders bored to 95 C.I.
Black Widow Custom cams
Screamin Eagle High Comp pistons
Fueling High Flow Oil pump
S&S Gear Drive timing
Black Widow Heads
.202 Intake Valve stock exhuast valve
1 piece valves
High lift valve springs
Ported and polished
Shaved Valve guides
Screamin Eagle roller rockers w/ billit mounting plate
Oil cooler w/ filter boss
44mm Carb w/ thunderslide
K&N air filter
Screamin Eagle Ignition with coil pack
Vance and Hines exhaust

Suspension, Wheels, Brakes, and Drive terrain:
Progressive Front springs
Progressive 440 Rear springs and shocks
Brembro front brake caliper
Stock rear 4 piston brake
Full float rotars
Stock Transmission
Stock belt pully
A.I.M. Variable pressure hub
Screamin eagle pressure plate
Screamin eagle clutch pack
Auto adjusting primary chain tensioner
5 Star Allow wheels (16" rear, 21" front)

Paint and trim:
Paint is black with a blue pearl, and airbrush
Chrome Chrome and more Chrome
Black Drag bars
Custom Seat
 


You must log in or register to reply here.
Top