Peep this fellow club buddies, ok, when i pulled out my 3 main gauge cluster bulbs, they read "158" on them, so i supposed that i need to use the mini-wedge base 158's to replace with LEDs of the same set up, like here:
http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=/mini-wedge.html
the first box at the top, the WLED miniature wedge base bubls. im getting these (WLED-x) for my 3 main dash lights. i have one problem though, there is a smaller bulb in the center of the gauge cluster that is i guess the middle 'main' bulb, but its smaller than the 158 bulbs on the outsides, there are 2 on the side with the fuel gauge, one is clear to light up the low gas light, the big one right next to it is used for the gas gauge itself and the right side of the speedometer, the far right main light is used for the temp gauge and the left side of the RPM, but there is a smaller main bulb that is dead center of the backside of the gauge cluster, and im guessing that lights up the right side of RPM's and left side of the Speedometer. but see, i dunno what size that small bulb is! i want to replace all my 3 main bulbs to blue LEDs (i wanted to do red, but there is that blue light bar type thing on the top of the gauge cluster, there is a bulb with a wire going to the top of the gauge cluster to a blue bar, ive never seen my teggy at night lit up, so i dunno how bright it is or anything, but would anybody happen to know the size for the small center main bulb? i want to switch it to an LED as well. just cant get the little blue cover off of it without ripping it apart since i guess the heat bakes it onto the light(?)
*correction: the bulb that has the wire going from it to the light bar on top of the cluster i think lights up the left side of the Speedo, and provides power to the light bar on top.. anybody happen to know what size that bulb is too? since it is smaller than the other small main bulb
My bad, i know this is a 3rd Gen thread, but when i googled this problem, this link came up to the CI site, and i just decided to go ahead and ask my question 8)