Search results

Hi I have an Integra DB1 with skunk2 coilover sleeves with 10k and 8k springs. My shocks are filled with custom oil, and are stiffer than Stock, however, the shocks are with NO gas and this effects handling very bad. I need very good handling, that's what I aim. What do you recommend...

hi, In what conditions "thicker" spark plug cables are needed ?

Hi this is my config : b18a1 block darton spec MID sleeves 81 mm cp pistons 9:1 eagle rods acl race bearings arp head bolts b18c1 head (stock) b18c1 intake manifold b18c1 throttle body obd1 distributor and ignition components ramhorn turbo manifold t3/t4 turbo (a/r 60)...

What kind of transmission oil to use in '91 Integra LS ? is 10-40W Semi-Synthetic OK ? The manual says 10-30W SF/SG but i guess I can't find such oil at today's market.

Hello I have a newly built b18 motor. There's no oil leak as I see from above or under the car and the oil level on the stick is on the maximum line. Since the motor is just built, I put Mobil 1000_20-50 non-synthetic oil. The pressure while the motor is cold is 60 psi (or more) at 3000...

Sleeved Block B18A2 Pistons & Rods installed "Darton Style" Sleeves CP Pistons 81.5mm comp. 9:1 Eagle rods I'm gonna install the B16A2 Vtec Head with ARP studs in a few days..

Hi I'm combining the B18A1 block with the B16A2 head along with the stock B16A2 Intake Manifold. Will it cause problems on making a 350 whp Integra on a turbo setup ? Or SHOULD I change the manifold with a larger diametered Skunk2 or smth like that ? thanks..

Does b18a1 throttle body fits b16a / b18c5 ?

Hi I bought the CP Pistons #7011 from a friend. It's a 9:1 pistons for B18C1 as stated on CP website. However, I want to use it on B18A1. Possible ? And what is the difference ?

Hi I bought a gasket without a packet. Is this gasket cometic or OEM ? or something else. Can you help ?

Hi I bought the 84mm Darton Sleeved B18B1. I have a b18a1 head which will work good, I guess. My target is having a daily use car with 350 WHP. I have a T3/T4 hybrid turbo. Which CR pistons do you recommend ? Currently I can have Wiseco 84mm 8.5:1 pistons in one day as these are the...

What is the difference between B18A and B18B ? Can I use B18B block instead of B18A with the B18A head ? Thanks..

Hi Did you hear a gasket brand "Stone" ? Did you ever use it ? How can it be ?

I have tein s-tech (2" drop) springs on my '91 DB1 Integra. They seem to be too soft that the car is jumping too much. My stock shocks are in very good condition. Fronts are used for 2-3 months after bought brand new. Are these springs always like this, or do you think do I have another...

Hi.. 1. My T3 turbo's shaft plays back&forward like 1/4" and also plays up&down more than the tolerable distance. I haven't changed the turbo yet. 2. Engine burns oil and I can smell it while I drive. Also, blur smoke is coming out of the muffler. Are these 2 connected ? Does engine...

Hi Is it possible to find side door moldings of '91 Integra DB1 (4-door) ? Do you know any place which sells ALL the spare parts ? Regards

hi.. What other Honda rear shocks can I use on my '91 Integra ? Maybe civic ?

Eagle rods CRS-5394-B I have these came from a friend. And nowadays I'm collecting parts for more power from my B18A2 (more/less same as B18A1) Do these rods fit to B18A1 ? I will use 81mm forged pistons.

Hi Is there any narrow radiator being sold that directly fits withouth any modifications for B18A1 ? I want more space for the turbo & manifold.. thanx

a general question : What if we use the standard OEM filterr instead of a K&N Performance filter on a 300 hp Turbo Integra ?