Search results

I recently got a 91 integra with a b16a swap obd0. It has aem cam gears not sure if it has aftermarket cams or not but idle jumps and the car stalls when I drop it out of gear. Also runs really rich and doesnt pass emissions (probably because it doesnt have a cat). I tried cleaning iacv with no...

I think the ecu is fine because I tried one that I bought off a junkyard and still nothing and I tried the same one on my pops integra and I worked perfectly

I already posted this on g1 teg but wanted to see if anybody has any suggestions So I rebuilt my engine recently and it ran fine for about 2 weeks and then one morning just shut off and has no spark and fuel pump isn't pumping. Engine grounds have all been cleaned. Power comes up to the coil...

Thanks a lot

Just wondering if anybody can help me out with my valves I want to reface them and I'm not sure what angle there supposed to be refaced at and what the margin limit is? And also if intake valves with too little if a margin are going to cause problems Thanks

a while back i replaced my clutch and got my flywheel resurfaced soon after, it started to become difficult to stick the car into gear the clutch i used was a rhino pac(cost less auto parts clutch) when im at a stop light and cant put it into put into 1st, i can put it into 4th and then into 1st...

anybody know if theres a rear window visor available for an 89 integra? or any rear window visor that will fit?

its an 89 and the top is red not orange, i think it was the flash that made it orange but thanks anyways im taking the interior out just to clean it up...the carpet was stained in a few spots but i think i got most them off

just some pictures of my small project got the car for 500 off auction with 150k miles has about 185 now and leaking oil so i decided to change some of the gaskets and seals

hey guys i was going to low boost my integra and did a little research on it and came up with upgrading head studs rod bolts exhaust and a tune....the problem is i cant find a set of head studs that will work on my engine...the ARP ones are all the same size and i need one that is 9mm longer...

lately ive been having some issues in my integra....the cluster will randomly decide not to work but speedo temp and fuel gauge still work. Sometimes the rpms will drop then about a minute later thell jump up and the oil light begins flashing.....maybe its the wiring?or just the cluster is going...

I figured it out already... It was the relay which i had two so I changed it, changed the sparkplug wires and after cranking it an pumping the gas it fired up:D Thanks for the reply though ... Really appreciate it

hey everybody i recently swapped a d16a1(stock) engine into my integra and when i try to start it it will just crank and wone fire up. im pretty sure i hooked every thing up correctly. the car has been standing there for about 2 years and honestly i have no idea what the problem might be sorry...

hey graveyard hippie do you think its possible if you uploaded pictures of the actual torison bar and where you file it down...kinda confused

Nevermind I think I found it... For Yakima I'll need q towers and q17 clips

yeah i was looking for one for my car or one thatll fit doesnt really matter thule didnt have anything

Hey guys just wondering if anybody knows what kind of a rook rack that will fit on my 89 integra 4dr...