Kent_racing
New Member
i got a 1st gen lip from a 88 integ will it bolt right up or do i need to do modifications for it to fit my gen 2?
1st gen lip on a gen 2
- Thread starter Kent_racing
- Start date
Samurai_Blue
Yolo Whippin'
you may need modifications
BrokenTalon27
W.F.O
Takes a little bit of work. Nothing too hard. Self tapping screws, cutters, and you should be set.
guiltyxxspark
Internet Hate Machine
Should be really close. I sold one to ^^^that guy a while ago. It's a good lookin' lip.
BrokenTalon27
W.F.O
I still have it. I got another 94-95 Accord lip I'm gonna put on though.Should be really close. I sold one to ^^^that guy a while ago. It's a good lookin' lip.
The lip is the 86-87 lip so it has to be modified and widened to fit. The one that is pretty much a bolt up is the 88-89 lip.
It is a good looking lip though, just requires a little more work.
guiltyxxspark
Internet Hate Machine
Ahh gotcha. I'm looking for a lip also. I tried googling what I want but can't seem to find it. It's the US racing style lip that you see on old school VW's, Sentras and the like.I still have it. I got another 94-95 Accord lip I'm gonna put on though.
The lip is the 86-87 lip so it has to be modified and widened to fit. The one that is pretty much a bolt up is the 88-89 lip.
It is a good looking lip though, just requires a little more work.
Orlando_GSR
New Member
I did it but the lip was so bad (condition) I ended up taking it off. Its not a perfect fit due to the 1st gen having a boxy bumper. Many people have it and if the lip is clean it will look good... maybe heating it might help form it some...