90 db1

brilla46

Member
I have a 90 Integra with a b18b1 and it runs but when I give it gas it dies what could cause this and it also have the pgmfi intake on it but no evap hoses any help would be great thanks

Sent from my HTC One using Tapatalk
 

DonJulio

Reppin' tha NW
Tps is bolted on by headless screws that look like rivets.

They are adjusted and then bolted on. If spun or knocked by something your ecus timing to the engine will be off.

Or they just go bad but that's rare.
 


DonJulio

Reppin' tha NW
Tap your oem tps. It should tell you your current volt at closed throttle.

FSM recommends .45 volts at closed.

Somewhere around 4.5 at WOT.
 
You must log in or register to reply here.
Top