Btag
New Member
What's up t e g g y family. I need some help on my wiring for the 26 pin big ECU connector. So I was going to rewire my connector not the one off the firewall but the one plugging into it and I had the pin some of the clips before checking to see which why are they actually connected to on the firewall side now I have about 5 to 6 wire exposed that I don't know where they go to because they don't have the same color coming off the firewall I did get a diagram however diagram is going to confusing due to the coloring issue. The wires I have left Exposed on that 26 pin connector from the firewall side is brown/ White
Blue
Green/black
Pink
White
White/green.
Can someone tell me where these go.. thanks.
Blue
Green/black
Pink
White
White/green.
Can someone tell me where these go.. thanks.