98 RHD integra alarm install need wire colors

[tenshi_R]

i found everything except door locks.

the wires are blue white/blue red from the door lock relay box in the driver door.

but they are not same as usdm integra.

theres no door lock buttons.

on the door panel.

 

[suspendedHatch]

You advertise as a certified alarm installer?

Why aren't there door lock switches on your door panel? How does the car have power door locks?

Go to the actuator and trace the wires back. You verify the wires with a multimeter. Hold the lock switch down and test for continuity to ground. Then take an inline fuse holder with a small fuse, like a 1 or 3, then tap the wire to ground. That will trigger the actuator.

Make sure you're using relays on the alarm wires unless they're high current outputs.

 

[tenshi_R]

im sorry who are you?
and maybe since you so badass you should have an answer for me...

but for anyone else installing the alarm

some of the R's have only pass door lock operated by a manual driver door handle or the key.
theres no lock motor in driver door
theres no door lock buttons
and there is no tweeters in doors.

93 300zx have same type of door locking system
in this case you have to add an actuator to driver side door only and wire it in.
the driver door controls pass door locking mechanism.