abs light on

[tegger01]

does anyone have any problems, after the dropped there car and the abs light is on? i had this light on for awhile, now its just bugging me.. any suggestions?? thanks..

 

[Integraguy04]

just check the code for the abs...you do it the same way as checking the CEL light

 

[IXsokudo]

1.) remove cluster
2.) remove abs bulb
3.) remove ABS

thats if you dont care to have it any longer. after my abs motor went I disconnected it as above.

 

[mirrorimg]

1.) remove cluster
2.) remove abs bulb
3.) remove ABS

thats if you dont care to have it any longer. after my abs motor went I disconnected it as above.

Talk about covering up an underlying issue. This is like putting a bandaid on a hole in a submarine at 2000 ft. I hope when you say "Removed ABS" you in fact meant replaced all of the ABS lines with non-ABS lines and a proportioning valve from an RS.

 

[IXsokudo]

That's right.

 

[filipinoy06]

maybe its just the sensor. try to wipe it. it happened on my teggy before.

 

[Fats]

wheel bearing...

 

[mirrorimg]

wheel bearing...

no.