whitepearlteggy New Member Mar 5, 2013 #1 Hi I just finished swaping my 97 integra with a 99 b20b and I have a check engine light for the crank positioning sensor where does this sensor go it's hanging near my altenator and is there anyway to bypass it???
Hi I just finished swaping my 97 integra with a 99 b20b and I have a check engine light for the crank positioning sensor where does this sensor go it's hanging near my altenator and is there anyway to bypass it???
ramatan New Member Mar 5, 2013 #2 yes there is... google it u can get the signal from the distributor with involve cutting some wires or you can just go obd1
yes there is... google it u can get the signal from the distributor with involve cutting some wires or you can just go obd1
whitepearlteggy New Member Mar 5, 2013 #3 I heard something about splicing some wires but I don't exactly know how to do it
zzbabar New Member Aug 13, 2013 #4 i just did that swap:] i did the wiring also. ill find the sheet of paper and post it ASAP
rexpepper123 Active Member Oct 16, 2013 #6 ill be doing this swap soon. ill need to do the same on my 98 ls?