Ball Joint press Question!! please help!

[JoeystegDA]

Hey guys,
I have a 90 Integra that needs ball joints!! It needed all four ball joints when I bought it a few months ago. Since then, I replaced the upper control arms with the ball joints already on them. The bottom is a different story as you all may know. For those of you who have used a ball joint press.... Is it difficult to use? Do I need a compressor or can I just use a wrench? I have a bunch of tools as I mostly fix my own cars and my friends cars as well but I dont have a compressor. Please let me know if i need one!
Thanks in advance,
JOE

 

[JoeystegDA]

ANd for those of you who are interested in seeing my car... here is the link : )
http://www.clubintegra.com/board/showthread.php?t=53476&highlight=90+integra

 

[jdmjim]

there pressed in and a challeng with a normal press but it can be done

 

[nuenjin]

Here is a video of a very knowledgeable guy doing a walkthrough of '90 accord balljoint.

good luck

http://www.youtube.com/watch?v=zd5IcN3yjsg&feature=player_embedded

 

[JoeystegDA]

Thanks for the quick response guys.... looks like I can def get this job done myself!! ill try to post some pics of how I do it. Im renting the press from autozone tonite and getting it done tomorrow morning!