BC Cams for b20b

[JDMb20DC2]

So i need advice on some BC cams. I want the cammed sound and also want to put aftermarket cams in as well so i've googled brian Crower 404s and alot all motor b18b and b20b sound good with them. I know i'd be needing a tune when im doing mods like cam gears/cams etc etc but my question is, what cams do i need to achieve the cammed sound.

I know this DA is boosted but im sure without the boost it would still have the "cammed" sound.


1990 Turbo Integra DA9 Crower 404's Idling


Keep bullshit out of this thread.

And i'd be staying low compression and does it matter if its non-vtec b20 or b20vtec?


edit: it dont have to be BC cams but any brand cams that can give me that sound :skunk2,blox...etc etc

 

[mirrorimg]

Brian crower does not make the 404's. Thats crower. The lopey idle is because of the high lift and overlap of the cams. Its safe to say any nonvtec with crower 404's will sound roughly the same.

The thing is, the cams wont make the best power unless you increase your conmpression. It most likely says somewhere on the website the compression that is best suited for the cams.